How to service and repair the turn signal switch on Chevrolet Corvette?

You can start working on the Turn Signal Switch when you take off both upper and lower steering column trims. Unplug the wiring straps that connect to the steering column lift head assembly and column. Pull the wire harness assembly out from the wire harness strap. You need to uninstall the multifunction Turn Signal Switch assembly by taking out the two pan head tapping screws first.

How to replace the multifunction turn signal switch on Chevrolet Corvette?

Start with the process of removing the upper and lower Steering Column trim covers to replace the multifunction Turn Signal Switch. Next, unsnap the wire harness straps from the Steering Column tilt head assembly and the column; then, remove the wire harness assembly from the wire harness strap . Remove the 2 pan head tapping screws and then kick out the multifunction Turn Signal Switch assembly . For install, locate the multifunction Turn Signal Switch assembly on Steering Column assembly, so that electrical comes in contact with turn signal cancel cam assembly, fasten the screws with 7 nm (62 inch lbs.). Install the 2 pan head tapping screws, trace the wire harness assembly along the Steering Column jacket assembly and it's gives info, insert the wire harness assembly into the wire harness strap. Finally, connect new wire harness straps to the Steering Column assembly and the column and connect the upper and lower Steering Column trim covers.

OEM Chevrolet Corvette Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Turn Signal Switches found

View related parts
Chevrolet Corvette Turn Signal Switch Part Number: 20808029
$70.66 MSRP: $119.93
You Save: $49.27 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Turn Signal Lamp; Multi Purpose Switch; Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Switch, Headlamp Dimmer
- Replaces: 01999391, 1999391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Turn Signal Switch Part Number: 1997097
$59.75 MSRP: $106.69
You Save: $46.94 (44%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch
- Replaced by: 01995974
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990 Chevrolet Corvette | Base, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Turn Signal Switch Part Number: 13545935
$37.31 MSRP: $55.53
You Save: $18.22 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch
- Replaced by: 13555285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chevrolet Corvette | Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Turn Signal Switch Part Number: 13539720
$37.31 MSRP: $55.53
You Save: $18.22 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch; Signal Switch
- Replaced by: 13555285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2021 Chevrolet Corvette | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Signal Lever Part Number: 25140540
$129.85 MSRP: $242.31
You Save: $112.46 (47%)
ADD TO CART
Product Specifications
- Other Name: Lever, Turn Signal Control; Lever
- Replaces: 25140140
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Corvette | Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Turn Signal Switch, Jet Black Part Number: 84489122
$49.02 MSRP: $71.36
You Save: $22.34 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal *Jet Black; Multifunction Switch; Combination Switch; Signal Switch; Switch, Turn Signal Lamp
- Replaces: 25980455, 20965178
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Turn Signal Switch Part Number: 26075870
Product Specifications
- Other Name: Switch Assembly, Headlamp & Turn Signal & Cruise Control (W/Lever); Multi Purpose Switch; Headlamp Switch; Combination Switch; Lever; Fog Lamp/Turn Signal/Cruise Control Selector.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Turn Signal Switch Part Number: 1997984
Product Specifications
- Other Name: Switch Assembly, Turn Signal; Hazard Flasher Switch; Multi Purpose Switch; Hazard Switch; Signal Switch; Turn Signal & Hazard Switch; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Corvette | 35th Anniversary Edition, Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Set/Resume Switch Part Number: 19331640
Product Specifications
- Other Name: Lever, Turn Signal Control; Turn/Wiper Lever; Lever
- Replaces: 25140558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Corvette | 40th Anniversary Edition, Base, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Lever Part Number: 25111318
Product Specifications
- Other Name: Lever, Turn Signal Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Corvette | Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Turn Signal Switch Part Number: 1995974
Product Specifications
- Other Name: Switch Assembly, Turn Signal; Multi Purpose Switch; Signal Switch; Switch, Turn Signal Lamp; Switch, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Corvette | 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS

Chevrolet Corvette Turn Signal Switch

Want to cut long-term maintenance and repair costs? Choose OEM Turn Signal Switch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Turn Signal Switch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Corvette Turn Signal Switch Parts and Q&A

Turn Signal Switch
26075870
Q: How to service and repair the turn signal switch on Chevrolet Corvette?
A:
You can start working on the Turn Signal Switch when you take off both upper and lower steering column trims. Unplug the wiring straps that connect to the steering column lift head assembly and column. Pull the wire harness assembly out from the wire harness strap. You need to uninstall the multifunction Turn Signal Switch assembly by taking out the two pan head tapping screws first.
Turn Signal Switch
20808029
Q: How to replace the multifunction turn signal switch on Chevrolet Corvette?
A:
Start with the process of removing the upper and lower Steering Column trim covers to replace the multifunction Turn Signal Switch. Next, unsnap the wire harness straps from the Steering Column tilt head assembly and the column; then, remove the wire harness assembly from the wire harness strap . Remove the 2 pan head tapping screws and then kick out the multifunction Turn Signal Switch assembly . For install, locate the multifunction Turn Signal Switch assembly on Steering Column assembly, so that electrical comes in contact with turn signal cancel cam assembly, fasten the screws with 7 nm (62 inch lbs.). Install the 2 pan head tapping screws, trace the wire harness assembly along the Steering Column jacket assembly and it's gives info, insert the wire harness assembly into the wire harness strap. Finally, connect new wire harness straps to the Steering Column assembly and the column and connect the upper and lower Steering Column trim covers.