ChevyParts
My Garage
My Account
Cart
OEM Chevrolet Tahoe Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
18 Shift Cables found
Chevrolet Tahoe Shift Cable Part Number: 15037353
$95.89 MSRP: $163.27You Save: $67.38 (42%)
Chevrolet Tahoe Shift Control Cable Part Number: 20787609
$47.30 MSRP: $80.53You Save: $33.23 (42%)Ships in 1-2 Business Days
Chevrolet Tahoe Shift Control Cable Part Number: 20787608
$59.43 MSRP: $98.94You Save: $39.51 (40%)Ships in 1-2 Business Days
Chevrolet Tahoe Shift Control Cable Part Number: 84507731
$58.53 MSRP: $99.65You Save: $41.12 (42%)Ships in 1-2 Business Days
Chevrolet Tahoe Shift Control Cable Part Number: 20787607
$87.46 MSRP: $148.89You Save: $61.43 (42%)Ships in 1-2 Business Days
Chevrolet Tahoe Shift Control Cable Part Number: 20787606
$46.89 MSRP: $79.81You Save: $32.92 (42%)Ships in 1-2 Business Days
Chevrolet Tahoe Cable Part Number: 84900875
$34.80 MSRP: $51.79You Save: $16.99 (33%)Ships in 1-3 Business Days
Chevrolet Tahoe Shift Control Cable Part Number: 84867183
$32.62 MSRP: $53.73You Save: $21.11 (40%)
Chevrolet Tahoe Shift Control Cable Part Number: 19180564
$101.07 MSRP: $158.39You Save: $57.32 (37%)Ships in 1-3 Business DaysChevrolet Tahoe Shift Control Cable Part Number: 19177020
$40.91 MSRP: $64.09You Save: $23.18 (37%)Ships in 1-3 Business DaysChevrolet Tahoe Shift Control Cable Part Number: 84525959
$45.48 MSRP: $66.80You Save: $21.32 (32%)Ships in 1-2 Business Days
Chevrolet Tahoe Shift Control Cable Part Number: 84507732
$47.26 MSRP: $70.35You Save: $23.09 (33%)Ships in 1-3 Business Days
Chevrolet Tahoe Shift Control Cable Part Number: 20787612
$53.49 MSRP: $79.62You Save: $26.13 (33%)Chevrolet Tahoe Shift Control Cable Part Number: 19434392
$36.57 MSRP: $62.27You Save: $25.70 (42%)Chevrolet Tahoe Shift Control Cable Part Number: 84525957
$58.53 MSRP: $99.65You Save: $41.12 (42%)Ships in 1-2 Business DaysChevrolet Tahoe Shift Control Cable Part Number: 84507729
$47.74 MSRP: $81.98You Save: $34.24 (42%)Ships in 1-2 Business Days
Chevrolet Tahoe Parking Brake Cable Part Number: 26082803
Chevrolet Tahoe Shift Control Cable Part Number: 19207880
Chevrolet Tahoe Shift Cable
Want to cut long-term maintenance and repair costs? Choose OEM Shift Cable. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Tahoe parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Tahoe Shift Cable includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Chevrolet Tahoe Shift Cable Parts and Q&A
- Q: How to remove and install the shift cable for the 4L80-E Automatic Transmission on Chevrolet Tahoe?A:The 4l80-e automatic transmission Shift Cable features split sections which facilitate separate removal of its column end (front half) or transmission-end (rear half). Begin Shift Cable removal by setting the steering column shift lever to park and by raising the vehicle to its highest position. Follow this procedure for Shift Cable removal: first position transmission manual shaft to mechanical park then remove transmission bracket retainer before detaching Shift Cable terminal shaft end from transmission shift lever ball stud. The transmission bracket welcomes the Shift Cable's removal through performing two steps. First press the conduit end fitting's lower and upper tangs simultaneously before gently pushing the cable rearward. The center connector on transmission Shift Cable features a white plastic cover you can pull back while manipulating the center tabs of the lock button to extract an e-clip through radial motion at its central section. Throw away the removed e-clip and take off the center connector ends from the Shift Cable. Using a new e-clip take a straight down approach to secure the cable end. Start by putting the steering column shift lever into park position then remove the steering column shroud followed by the driver's seat before you peel the carpet and insulation away from around the driver's area. First detach the retainer holding the Shift Cable to the steering column and pull off the terminal shaft end from the ball stud and detach the conduit end fitting from the steering column bracket. When removing the Shift Cable from its support be cautious not to expose it to undesired twisting or bending forces. The Shift Cable grommet must be extracted from the floor panel. Using a second person to help raise the vehicle remove the two clips from the Shift Cable which are attached to the floor panel reinforcement. First remove the transmission manual shaft ball stud cable terminal end fitting before discarding the e-clip. A pre-installed e-clip ships with the front portion of the Shift Cable. Installation requires the following sequence: set the parking positions for steering column shift lever and transmission manual shaft lever then connect the Shift Cable clips to floor panel reinforcement followed by passing the Shift Cable through the floor panel hole before adding the grommet. Spend time lowering the vehicle so you can connect the conduit end fitting to its bracket on the steering column while making sure tangs completely lock into position. Secure the Shift Cable terminal shaft end to the steering column ball stud with its retainer. Lay the Shift Cable onto the support then secure the bolt to 10 nm (89 inch lbs.) tension before putting back the carpet and insulation and driver's seat and steering column shroud. Raise the vehicle one last time to push the end of cable into cable while using the left hand to hold the front half and the right hand to hold the rear half. Align cable diameters before fully compressing the blue spring. Allow cable to release so the blue spring tightens the system. Next, pull back the white cover on cable while pushing the natural colored lock button to set the locking teeth. A successful check on the lock involves ensuring the white cover properly hides the lock. Perform the necessary steps again if necessary. Testing the transmission's operation occurs after lowering the vehicle while adjusting the Shift Cable if the desired gear positions remain unattainable.
- Q: How to replace the Shift Cable on a 2ML70 automatic transmission on Chevrolet Tahoe?A:Starting the repair of a 2ml70 automatic transmission range selector lever cable requires placing the Steering Column shift lever to park position then unfastening the instrument panel knee bolster and driver seat before removing the body hinge pillar trim panel. Start by pulling back carpet and insulation in the driver area before using an appropriate tool to remove the cable retainer from the Steering Column bracket and detached the cable end from the Steering Column ball stud. Then release the tangs to extract the cable while preventing unnecessary range selector cable twisting or bending. Use this step to remove the support-based range selector cable as well as the cable grommet from the floor panel. Support the vehicle while rising it and detach the cable's clips from the reinforcement panel and the range selector lever cable heat shield bolts before removing the heat shield. The vehicle should have its transmission manual shaft positioned to mechanical park as the installer disconnects the range select lever cable from the range select lever before removing the cable retainer and cable from the cable bracket. Attach the transmission range selector cable to the vehicle while maintaining the transmission manual shaft lever in mechanical park before installing the range selector lever cable to the cable bracket and securing it with the retainer. Fasten the heat shield over the transmission with bolts and tighten them to 17 nm (13 lb ft). Do the vehicle drop and position the clips at the cable ends on the floor panel reinforcement when also keeping the Steering Column shift lever in park. The floor panel receives the cable grommet while the range selector cable becomes attached to its support before connecting to the Steering Column bracket until tangs fully hook in. The final step consists of attaching the cable end to the Steering Column ball stud followed by retaining the cable with its metal clip. After that install the carpet and insulation before replacing the body hinge pillar trim panel, driver seat, and instrument panel knee bolster. Perform a transmission shift test before adjusting the cable unless all gears fail to activate.
Related Chevrolet Tahoe Parts
Chevrolet Tahoe Automatic Transmission Filter
Chevrolet Tahoe Automatic Transmission Input Shaft Seal
Chevrolet Tahoe Automatic Transmission Seal
Chevrolet Tahoe Automatic Transmission Shift Levers
Chevrolet Tahoe Automatic Transmission Shifter
Chevrolet Tahoe Clutch Slave Cylinder
Chevrolet Tahoe Flywheel
Chevrolet Tahoe Pilot Bearing
Chevrolet Tahoe Transfer Case Seal
Chevrolet Tahoe Transmission Assembly
Chevrolet Tahoe Transmission Gasket
Chevrolet Tahoe Transmission Pan