How to clean the throttle body properly on GMC Savana 2500?

Before cleaning the Throttle Body, you can remove the air cleaner outlet duct. The Throttle Body bore and throttle valve plate should be checked for deposits and the throttle valve should be opened and all surfaces checked. Do not immerse clean or use force solvents on assemblies with throttle position (TP) sensor, idle air control (IAC) valve, or sealed throttle shaft bearings, as this may damage the electric components or seal or o-ring, as well as solvents may degrade non-serviceable bearing grease. Do not use a wire brush or scraper because these can damage components of the Throttle Body, while cleaners containing methyl ethyl ketone can damage things as well. Clean the Throttle Body bore, and valve plate with a clean shop towel using gm top engine cleaner (P/N 1052626) or its equivalence. If deposits are too much disassemble the Throttle Body in order to give it a thorough cleaning, by using a parts cleaning brush but you should never submerge it in some solvent. Reassemble and install the Throttle Body, and then re-attach the air cleaner outlet duct.

How to replace the throttle body assembly on GMC Savana 2500?

Beginning Throttle Body replacement requires users to disconnect the negative cable from the battery then remove engine cover and air cleaner outlet resonator and air cleaner adapter stud. The first step involves detaching the cruise control cable and accelerator cable from their connectors. Then remove the stud and nuts from the accelerator control cable bracket before placing it safely aside. The first task requires disconnecting idle air control (IAC) valve harness connector and throttle position (TP) sensor harness connector. Next remove Throttle Body retaining studs until the Throttle Body assembly can be extracted. Discard Throttle Body seat when finished. Clean the Intake Manifold gasket area before installing the new Throttle Body assembly with its new seal which requires 9 n.m (80 lb in) torque on retaining studs. Reinstall the adapter stud for the air cleaner outlet resonator while tightening fasteners to 8 n.m (72 lb in) then attach tp sensor and iac valve harness connectors. Use 12 n.m (108 lb in) of torque when fastening the accelerator control bracket while verifying the cables won't keep the throttle open. Reconnect the negative Battery Cable after installing the accelerator cable along with the cruise control cable and air cleaner outlet resonator and engine cover assembly. Test the accelerator pedal by letting it drop to the floor position and release it to ensure it moves without any interference.

OEM GMC Savana 2500 Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Throttle Bodies found

View related parts
GMC Savana 2500 Fuel Meter Part Number: 17113273
$74.17 MSRP: $231.39
You Save: $157.22 (68%)
ADD TO CART
Product Specifications
- Other Name: Body Kit, Throttle Body/Carburetor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12679524
$269.78 MSRP: $547.96
You Save: $278.18 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter; Electronic Throttle Body Assembly; Fuel Injection Throttle Body
- Replaces: 12580760, 12572658
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12629992
$275.89 MSRP: $560.36
You Save: $284.47 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter; Throttle Body Assembly; Electronic Throttle Body.
- Replaces: 12601387
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2015 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12729495
$91.37 MSRP: $163.16
You Save: $71.79 (44%)
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaced by: 12740727
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2023 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 98020819
$530.09 MSRP: $837.82
You Save: $307.73 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaced by: 19420710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Throttle Body Part Number: 55498943
$140.79 MSRP: $264.40
You Save: $123.61 (47%)
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 12637737
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Savana 2500 Throttle Body Part Number: 19420713
$196.41 MSRP: $398.92
You Save: $202.51 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 12679525, 12570800
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 GMC Savana 2500 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 19420711
$155.31 MSRP: $278.57
You Save: $123.26 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 98075298
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2016 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 2500 Fuel Meter Part Number: 17113274
$137.66 MSRP: $256.87
You Save: $119.21 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter, Throttle Body/Carburetor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 2500 | Base, SLE, SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12676296
$141.69 MSRP: $287.78
You Save: $146.09 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 12632171, 12671014, 12669536, 12648414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 GMC Savana 2500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12596576
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 89017227, 12580793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 GMC Savana 2500 | Base, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12596575
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 12580921, 89017228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 GMC Savana 2500 | Base, SLE | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12595300
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 12570190, 17113653
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 GMC Savana 2500 | Base, SLE, SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 17113531
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 GMC Savana 2500 | Base | 6 Cyl 4.3 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 17113389
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 17097213, 17096143
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 GMC Savana 2500 | Base, SLE | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
GMC Savana 2500 Throttle Body Part Number: 12595276
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 17113650, 88894295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Savana 2500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS

GMC Savana 2500 Throttle Body

Want to cut long-term maintenance and repair costs? Choose OEM Throttle Body. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 2500 Throttle Body includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Savana 2500 Throttle Body Parts and Q&A

Throttle Body
12595300
Q: How to clean the throttle body properly on GMC Savana 2500?
A:
Before cleaning the Throttle Body, you can remove the air cleaner outlet duct. The Throttle Body bore and throttle valve plate should be checked for deposits and the throttle valve should be opened and all surfaces checked. Do not immerse clean or use force solvents on assemblies with throttle position (TP) sensor, idle air control (IAC) valve, or sealed throttle shaft bearings, as this may damage the electric components or seal or o-ring, as well as solvents may degrade non-serviceable bearing grease. Do not use a wire brush or scraper because these can damage components of the Throttle Body, while cleaners containing methyl ethyl ketone can damage things as well. Clean the Throttle Body bore, and valve plate with a clean shop towel using gm top engine cleaner (P/N 1052626) or its equivalence. If deposits are too much disassemble the Throttle Body in order to give it a thorough cleaning, by using a parts cleaning brush but you should never submerge it in some solvent. Reassemble and install the Throttle Body, and then re-attach the air cleaner outlet duct.
Fuel Meter
17113274
Q: How to replace the throttle body assembly on GMC Savana 2500?
A:
Beginning Throttle Body replacement requires users to disconnect the negative cable from the battery then remove engine cover and air cleaner outlet resonator and air cleaner adapter stud. The first step involves detaching the cruise control cable and accelerator cable from their connectors. Then remove the stud and nuts from the accelerator control cable bracket before placing it safely aside. The first task requires disconnecting idle air control (IAC) valve harness connector and throttle position (TP) sensor harness connector. Next remove Throttle Body retaining studs until the Throttle Body assembly can be extracted. Discard Throttle Body seat when finished. Clean the Intake Manifold gasket area before installing the new Throttle Body assembly with its new seal which requires 9 n.m (80 lb in) torque on retaining studs. Reinstall the adapter stud for the air cleaner outlet resonator while tightening fasteners to 8 n.m (72 lb in) then attach tp sensor and iac valve harness connectors. Use 12 n.m (108 lb in) of torque when fastening the accelerator control bracket while verifying the cables won't keep the throttle open. Reconnect the negative Battery Cable after installing the accelerator cable along with the cruise control cable and air cleaner outlet resonator and engine cover assembly. Test the accelerator pedal by letting it drop to the floor position and release it to ensure it moves without any interference.