GM 13590791
Bulb & Socket, Front

Before swapping the fog lamp bulb travelers should disconnect the lamp power supply and let the bulb cool since halogen bulbs hold compressed gas which could break if touched wrongly. You must protect your eyes at all times and need to hold the bulb at its base segment through its entire lifecycle. Touching the glass part of the bulb must be avoided at all times and the product needs to stay clear from all contamination and wet conditions. Start with front air deflector removal followed by disconnecting the electrical connector. Gently turn the bulb toward the opposite direction to free it from the fog lamp assembly. The installation procedure requires you to insert the new bulb into the fog lamp assembly by twisting it clockwise until locked then reconnect the electrical connector and finally put back the front air deflector. Discard the used bulb properly and maintain all halogen bulbs beyond child access reach.

First, remove the air deflector to replace the fog lamp bulb. Then, detach the electrical connector from the fog lamp bulb and rotate the fog lamp bulb in a counter-clockwise direction, to unplug it from the fog lamp housing . Disconnect the fog lamp bulb from the fog lamp housing. To install, insert the fog lamp bulb into the fog lamp housing and rotate to the clockwise direction to lock it in place. The electrical connector should be reconnected to the fog lamp bulb and the air deflector reinstalled.

Begin bulb replacement of the rear fog lamp by first removing its lens by unscrewing the retaining screws. First twist the bulb counterclockwise and pull it towards you from the rear fog lamp assembly. Take care with the safety requirements for halogen bulbs during operation. New bulb installation requires users to place it into the rear fog lamp assembly before a clockwise motion reinforces its position. Reinstall the rear fog lamp lens by using the retaining screws to attach it and torque the screws to 2 n.m (18 lb in). The last step requires a check of the rear fog lamp functionality.

The replacement procedure for fog lamp bulbs starts with disconnecting electricity while following the service precautions regarding halogen bulb caution. First twist the bulb counterclockwise before removing it from the fog lamp assembly. The new bulb requires insertion into the fog lamp assembly before clockwise twisting for installation and subsequent connector reattachment.

To change the front fog lamp bulb (Old Style), first, disconnect the electrical connector ensuring one has followed the halogen bulb caution in the service precautions. Then rotate the bulb to the counterclockwise and remove it from the fog lamp assembly. To install, place the new replacement bulb inside the fog lamp assembly and twist it clockwise until it is fastened before plugging in the electrical connector.

You should turn off the fog lamp switch to let the bulb cool before bulb replacement since halogen bulbs contain shattering pressurized gas. Handle the bulb only through its base and maintain contact with the glass to no more than touchpoints while keeping it dust-free and moisture-free and always wear eye protection. Disposed bulbs require proper dumping while all halogen bulbs must remain inaccessible to children. Before starting you must remove the front fender liner to expose the fog lamp and detach the electrical connector from the fog lamp. Begin bulb removal by rotating the fog lamp bulb to the counterclockwise direction. To install the newly inserted fog lamp bulb connect its electrical wires first then mount the front fender liner in place.

The first step to replace an old style front fog lamp bulb requires disconnection of wiring. You must twist the bulb counterclockwise before pulling it out from the fog lamp assembly according to the halogen bulb caution in service precautions. Installation of the new bulb starts by placing it into the fog lamp assembly before tightening it clockwise then reattaching the electrical connector.

The first step to replace the front fog lamp bulb (Old Style) requires disconnecting the electrical connector. The next step involves rotating the bulb counterclockwise followed by extracting it from the fog lamp assembly while paying attention to the halogen bulb caution mentioned in service precautions. After bulb placement into the fog lamp assembly users should twist the bulb clockwise to lock it into position before connecting the electrical connector.

Reconnect the electrical connector and reinstall the front air deflector.

Insert the new bulb into the fog lamp assembly and twist it clockwise.

Insert the new bulb into the fog lamp assembly and twist it clockwise to secure it.

First, remove the rear fog lamp lens by taking out the retaining screws.

Reinstall the air deflector.

Place the fog lamp bulb into the fog lamp lens and turn it clockwise to engage.

Inspect the operation of the rear fog lamp to ensure it is functioning correctly.

Reconnect the electrical connector to the fog lamp assembly and lower the vehicle.

Reconnect the wiring harness to the bulb and lower the vehicle.

Rotate the fog lamp bulb socket counterclockwise to release the bulb from the fog lamp housing.

Ensure to tighten the rear fog lamp lens retaining screws to 2 N.m (18 lb in).

First, remove the rear fog lamp lens by taking out the retaining screws.

First, remove the rear fog lamp lens by taking out the retaining screws.

Exercise caution regarding Halogen Bulb safety.

Rotate it clockwise until it is fully seated.

Rotate the bulb socket counterclockwise.

Take out the bulb from the socket.

Insert the new bulb into the fog lamp assembly and twist it clockwise to secure it.

Reattach the rear fog lamp lens by installing the retaining screws and tighten them to 2 N.m (18 lb in).

Insert the new bulb into the fog lamp assembly and twist it clockwise to secure it.

Insert the new bulb into the rear fog lamp assembly and twist it clockwise to secure it.