Make sure this part fits

GM 22846471
Negative Cable

2007-2014 GM

Customer Questions & Expert Answers (24)
GM 22846471 Negative Cable
GM 22846471 Negative Cable
  • Part Description
    Cable Assembly-Battery Negative; Battery Cables; Ground Strap
  • Replaces
    15826905, 25897054, 20835005, 20967455, 25848475
  • Manufacturer
    General Motors
Make sure this part fits
$71.71 MSRP: $128.06
You Save: $56.35 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22846471
    Part DescriptionCable Assembly-Battery Negative; Battery Cables; Ground Strap
    Other NamesCable, Battery Negative And Engine Ground
    Item Dimensions14.1 x 14.1 x 6.3 inches
    Item Weight2.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15826905, 25897054, 20835005, 20967455, 25848475
    ManufacturerGeneral Motors
    SKU22846471
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Cadillac EscaladeBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT, XFE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2009-2010 Chevrolet Silverado 2500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2009-2010 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2007-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2007-2014 Chevrolet TahoeLS, LT, LTZ8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22846471 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22846471 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after connecting the positive battery cable terminal for the 2008 Cadillac Escalade? Posted by Customer
    A:
    Reattach the positive battery cable clips to the studs on the plenum front panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How should the negative battery cable terminal be routed for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Route the negative battery cable terminal through the opening between the radiator support and frame, ensuring it is positioned behind the forward lamp harness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the final step in removing the positive battery cable for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Finally, remove the positive battery cable from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the next step after removing the generator battery jumper cable for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Detach the positive battery cable channel and clips from the studs on the plenum front panel, followed by the positive battery cable terminal from the mega fuse stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you remove the battery positive cable for the 2010 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the battery positive cable nut from the battery fuse block and take the positive battery cable out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you secure the junction block for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Ensure the junction block retainers are in the open position, align the junction block to the 4 bracket pivots, engage the pivots, and push the retainer down into the locked position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step to replace the negative battery cable for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    First, disconnect the negative battery cable and remove the air cleaner outlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you engage the junction block for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Align the junction block to the 4 bracket pivots, push the retainer down into the locked position, and reinstall the under hood junction block cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the positive battery cable to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after removing the underhood junction block cover for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Open the auxiliary battery positive cable post cover, then loosen and remove the auxiliary battery positive cable nut and the cable from the battery positive post.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after replacing the mega fuse cover for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Connect the positive battery cable connector to the UBEC.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step in the installation process for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the positive battery cable to the vehicle and connect the electrical connector to the drive motor generator control module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you install the new positive battery cable assembly for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    Position the positive battery cable assembly back into the vehicle and connect the positive battery cable leads to the mega fuse and auxiliary BEC studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step to replace the negative battery cable for the 2010 Chevrolet Tahoe? Posted by Customer
    A:
    First disconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What needs to be done after fully raising for the 2010 GMC Yukon? Posted by Customer
    A:
    Install the positive battery cable clips (2, 3, and 4) to the frame crossmember, followed by the engine shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the final step after securing the connection for the 2010 GMC Yukon? Posted by Customer
    A:
    Position the negative battery cable insulating cover over the negative terminal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done if replacing the negative battery cable for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Remove the battery current sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should you do after loosening the negative cable nut for the 2009 GMC Yukon? Posted by Customer
    A:
    Remove the negative battery cable from the battery terminal and reposition the cable away from the battery.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be removed after disconnecting the cables for the 2010 GMC Yukon? Posted by Customer
    A:
    Remove the negative battery cable clip from the auxiliary bussed electrical center (BEC) and the negative battery cable ground terminal bolt from the left side engine block boss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you secure the forward lamp wiring harness for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Install the forward lamp wiring harness terminal to the frame, ensuring the anti-rotation tab is inserted into the hole in the frame, and secure the forward lamp wiring harness ground bolt to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the next step after securing the starter solenoid cable for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Replace the mega fuse cover and reconnect the positive battery cable connector to the UBEC.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What covers need to be installed after the junction block for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Install the underhood junction block cover, the auxiliary BEC cover, and the positive battery cable terminal to the battery.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What do you do with the negative battery cable and engine wiring harness ground leads for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Take out the negative battery cable and the engine wiring harness ground leads from the engine block boss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22846471, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22846471 Negative Cable. It is sometimes referred to as GM Battery Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22846471 Negative Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery