Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19149553
Control Assembly

2003-2007 GM

Customer Questions & Expert Answers (8)
GM 19149553 Control Assembly
GM 19149553 Control Assembly
GM 19149553 Control Assembly
GM 19149553 Control Assembly
  • Part Description
    Control Assembly, Automatic Transmission
  • Replaces
    88967191, 88965357
  • Manufacturer
    General Motors
Make sure this part fits
$133.74 MSRP: $199.92
You Save: $66.18 (34%)
1
ADD TO CART

  • 19149553 Control Assembly is Ref No. 18 in the diagram below

    2005 Chevy Express 3500 Control Assembly Diagram for 19149553
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19149553

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Cadillac EscaladeBase8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2007 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2007 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2007 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2007 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2007 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2006 GMC YukonDenali, SL, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19149553 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19149553 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Automatic Transmission Shifter lever on Chevrolet Express 1500? Posted by Customer
    A:
    A technician should start by disabling the sir system before moving the shift lever seal toward the top of the shift lever. Steering column trim covers should be removed while you disconnect the shift lever connector at the base of the column only if needed. Extract the shift lever screw from the shift lever assembly to extract the shift lever assembly components with the exception of the shift lever seal from the linear shift assembly. The shift lever seal needs to be removed through sliding it into the shift lever's narrow section. To install the part, mount the shift lever seal onto the narrow end of the shift lever before fitting the shift lever assembly to the linear shift assembly. Insert the shift lever screw into the shift lever assembly while tightening it to 1.5 nm (13 inch lbs.). The shift lever assembly needs the shift lever seal slid downward before aligning it with the steering column trim covers. Reinstall the steering column trim covers after completing the final step which is enabling the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace Automatic Transmission Shift Levers on Chevrolet Express 3500? Posted by Customer
    A:
    First, you have to disable the sir system before replacing the shift lever. Move the shift lever seal up the shift lever, and take off the steering column trim covers if you have to. Unplug the shift lever from the base of the column and then take out the screw from the shift lever. Take the shift lever and seal out of the linear shift assembly, making sure you slide the seal towards the small end of the shift lever to remove it. Now, put the shift lever seal onto the narrow end of the shift lever assembly, and then connect the shift lever assembly to the linear shift assembly. Make sure the shift lever screw goes into the shift lever assembly, then tighten it carefully to 20 n.m (15 lb ft). Pull the shift lever seal along the shift lever to the base, making sure it sits correctly in the steering column trim covers. Should they have come off, put the steering column trim covers back in place, then enable the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Automatic Transmission Shifter lever on Chevrolet Express 2500? Posted by Customer
    A:
    The first step to replace an automatic transmission shift lever consists of disabling the sir system. The shift lever seal should be raised towards the top of the shift lever followed by examination of steering column trim covers. Remove the shift lever screw at the bottom of the column before disconnecting the connector and taking out the shift lever from its assembly. The shift lever needs to come out with the seal from the linear shift assembly yet the shift lever seal needs to slide towards the narrow shift lever section before removal. To install the piece place the shift lever seal onto the narrow end of the shift lever assembly before inserting the shift lever assembly to its linear position. The shift lever screw needs to be installed into the shift lever assembly and should be tightened to 20 nm (15 ft. Lbs.). Position the shift lever seal towards the narrow portion of the shift lever assembly until it reaches the steering column trim covers. Put back the steering column trim covers when necessary before activating the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Automatic Transmission Shifter lever on GMC Savana 1500? Posted by Customer
    A:
    A technician should start by disabling the sir system before moving the shift lever seal toward the top of the shift lever. Steering column trim covers should be removed while you disconnect the shift lever connector at the base of the column only if needed. Extract the shift lever screw from the shift lever assembly to extract the shift lever assembly components with the exception of the shift lever seal from the linear shift assembly. The shift lever seal needs to be removed through sliding it into the shift lever's narrow section. To install the part, mount the shift lever seal onto the narrow end of the shift lever before fitting the shift lever assembly to the linear shift assembly. Insert the shift lever screw into the shift lever assembly while tightening it to 1.5 nm (13 inch lbs.). The shift lever assembly needs the shift lever seal slid downward before aligning it with the steering column trim covers. Reinstall the steering column trim covers after completing the final step which is enabling the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Automatic Transmission Shifter lever on GMC Savana 2500? Posted by Customer
    A:
    The first step to replace an automatic transmission shift lever consists of disabling the sir system. The shift lever seal should be raised towards the top of the shift lever followed by examination of steering column trim covers. Remove the shift lever screw at the bottom of the column before disconnecting the connector and taking out the shift lever from its assembly. The shift lever needs to come out with the seal from the linear shift assembly yet the shift lever seal needs to slide towards the narrow shift lever section before removal. To install the piece place the shift lever seal onto the narrow end of the shift lever assembly before inserting the shift lever assembly to its linear position. The shift lever screw needs to be installed into the shift lever assembly and should be tightened to 20 nm (15 ft. Lbs.). Position the shift lever seal towards the narrow portion of the shift lever assembly until it reaches the steering column trim covers. Put back the steering column trim covers when necessary before activating the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace Automatic Transmission Shift Levers on GMC Savana 3500? Posted by Customer
    A:
    First, you have to disable the sir system before replacing the shift lever. Move the shift lever seal up the shift lever, and take off the steering column trim covers if you have to. Unplug the shift lever from the base of the column and then take out the screw from the shift lever. Take the shift lever and seal out of the linear shift assembly, making sure you slide the seal towards the small end of the shift lever to remove it. Now, put the shift lever seal onto the narrow end of the shift lever assembly, and then connect the shift lever assembly to the linear shift assembly. Make sure the shift lever screw goes into the shift lever assembly, then tighten it carefully to 20 n.m (15 lb ft). Pull the shift lever seal along the shift lever to the base, making sure it sits correctly in the steering column trim covers. Should they have come off, put the steering column trim covers back in place, then enable the sir system.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Automatic Transmission Shifter lever on GMC Savana 3500? Posted by Customer
    A:
    Before repair of an automatic transmission shift lever the sir system needs to be disabled. The shift lever seal needs to be slid all the way up the shift lever before proceeding to detach the steering column trim covers if needed. The base of the column requires you to unplug the shift lever connector followed by unscrewing the shift lever screw from the shift lever assembly. The shift lever needs removal by sliding out both components from the column while directing the shift lever seal into the shift lever assembly's narrow section. Fit the shift lever seal onto the small section of the shift lever assembly. The shift lever assembly can then be put back in place while tightening the shift lever screw to 1.5 nm (13 inch lbs.). Position the shift lever seal at the bottom of the shift lever assembly so it fits correctly with the steering column trim covers. When necessary put back the steering column trim covers followed by activating the sir system.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Control Assembly 19149553 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19149553 Control Assembly is available in the market under the name GM Automatic Transmission Shifter, Automatic Transmission Shift Levers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19149553 Control Assembly fits certain Chevrolet Tahoe, Express 1500, Express 2500 models, as well as GMC Yukon, Savana 2500, Savana 3500. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by manufacturer part number 19149553 maintains top performance when functioning as the Control Assembly, Automatic Transmission unit. The component 19149553 is constructed from durable material and its dimensions span 8.0 x 7.1 x 7.0 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock Assembly; Control, Transmission Shift Lever. The part 19149553 has available replacement options 88967191, 88965357. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.