Make sure this part fits

GM 15196652
Handle, Silver

2003-2007 GM

Customer Questions & Expert Answers (18)
GM 15196652 Handle, Silver
  • Part Description
    Handle, End Gate Lock
  • Manufacturer
    General Motors
Make sure this part fits
$104.71 MSRP: $149.83
You Save: $45.12 (31%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15196652 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15196652 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the handle bolts for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Engage the linkage rods and then install the handle bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    How should the inside door handle retaining bolts be installed for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the inside door handle retaining bolts, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be applied to the lock cylinder before installation for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Apply a coating of GM P/N 12345120 or Canadian P/N 726548 or a similar lubricant to the inside of the lock case and the cylinder keyway.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you access the outboard nut for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Take off the rubber cover to access the outboard nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new handle for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Position the handle assembly on the endgate and install the handle bolts loosely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    What should be done after installing the handle bolts for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Engage the linkage rods and install the handle bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    What is the important detail to remember when tightening the handle bolts for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    It is important to tighten the handle bolts to 25 N.m (18 lb ft) while adhering to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    What is the next step after removing the handle for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the new handle onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the tailgate release handle for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    First, loosen the handle bolts and gently pry off the handle bezel by working on the upper retainer tabs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    What should be followed to prevent damage to parts and systems for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Follow the correct tightening sequence and specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for the inside door handle retaining bolts for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Tighten them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after connecting the handle rod for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the masking tape from the door handle and install the outside handle mounting nuts, tightening them to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new handle for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Position the handle assembly on the endgate and install the handle bolts loosely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    What is the next step after removing the old handle for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the new handle onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new handle assembly for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Position the handle assembly on the endgate and install the handle bolts loosely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    Q:
    What should be done after removing the trim panel for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the inside door handle mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the important detail to remember when tightening the handle bolts for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    It is important to tighten the handle bolts to 25 N.m (18 lb ft) while adhering to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Silver 15196652 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15196652 Handle, Silver is available in the market under the name GM Door Handle, Tailgate Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15196652 Handle, Silver fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 15196652 maintains top performance when functioning as the Handle, End Gate Lock unit. The component 15196652 is constructed from durable material and its dimensions span 8.1 x 5.4 x 5.5 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15196652 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.