Make sure this part fits

GM 15794420
Power Steering Return Hose

2006-2011 GM

Customer Questions & Expert Answers (13)
GM 15794420 Power Steering Return Hose
  • Part Description
    Hose Assembly-Power Steering Gear Outlet; Power Steering Hose
  • Replaced By
    19436429
  • Manufacturer
    General Motors
Make sure this part fits
$118.05 MSRP: $200.99
You Save: $82.94 (42%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCXL, CXS, Super8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15794420 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15794420 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after raising for the 2008 Buick Lucerne? Posted by Customer
    A:
    Remove the steering gear heat shield and install a drain pan under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you connect the hose to the power steering gear for the 2006 Buick Lucerne? Posted by Customer
    A:
    Connect the hose to the power steering gear and tighten it to 30 Nm (22 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2009 Buick Lucerne? Posted by Customer
    A:
    Position the power steering return hose in the vehicle and connect the power steering return hose plastic retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for connecting the power steering pressure hose fitting to the steering gear for the 2010 Buick Lucerne? Posted by Customer
    A:
    Tighten it to 34 Nm (25 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the power steering pressure hose be connected to the power steering gear for the 2007 Buick Lucerne? Posted by Customer
    A:
    Connect the power steering pressure hose to the power steering gear, tightening it to 30 N.m (22 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What are the final steps after installing the new hose for the 2008 Buick Lucerne? Posted by Customer
    A:
    Reinstall the power steering gear heat shield, lower the vehicle, bleed the power steering system, and finally inspect for any leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the final step before lowering for the 2006 Cadillac DTS? Posted by Customer
    A:
    After removing the drain pan, lower the vehicle and install the power steering return hose mounting bracket and retaining bolt (W715202-S300) to the cylinder head, tightening the bolt to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after disconnecting the power steering return hose for the 2008 Cadillac DTS? Posted by Customer
    A:
    Remove the power steering return hose mounting bracket retaining bolt from the cylinder head, then raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the power steering return hose for the 2010 Cadillac DTS? Posted by Customer
    A:
    Install a drain pan under the vehicle and disconnect the power steering return hose from the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2009 Cadillac DTS? Posted by Customer
    A:
    Place the new power steering return hose onto the vehicle and secure it to the frame brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done at the end of the process for the 2007 Cadillac DTS? Posted by Customer
    A:
    Finally, bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done last in the process for the 2007 Cadillac DTS? Posted by Customer
    A:
    Remove the drain pan and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Return Hose 15794420 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15794420 Power Steering Return Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15794420 Power Steering Return Hose fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 15794420 maintains top performance when functioning as the Hose Assembly-Power Steering Gear Outlet; Power Steering Hose unit. The component 15794420 is constructed from durable material and its dimensions span 35.2 x 25.6 x 6.8 inches while weighing 1.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Return Hose; Hose, Steering Gear Oil Return. The part 15794420 has available replacement options listed under 19436429. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.