How to replace the Return Power Steering Hose on Cadillac DTS?

Question

Accepted Answer

The power steering return hose replacement process starts by installing a drain pan underneath and then disconnecting the hose from the Power Steering Pump. Start the process by removing the w715007-s300 bolt which retains the mounting bracket of the power steering return hose on the Cylinder Head while also lifting the vehicle for support. Medical professionals must remove two elements that include the front air deflector and power steering gear heat shield. First detach the power steering return hose from the wiring harness tie strap while removing it both from frame brackets and the power steering gear before pulling it off the vehicle. The power steering return hose must be installed to the vehicle followed by frame brackets while keeping to the fastener notice. The hose should be fastened to the power steering gear at 27 n.m (20 lb ft) but must also be secured to the wiring harness through a new tie strap. After fitting the front air deflector and power steering gear heat shield you must take out all remaining fluid from the drain pan before lowering your vehicle. Replacement of the power steering return hose mounting bracket (W715007-S300) begins by securing the bracket to the Cylinder Head through bolt tightening to 50 n.m (37 lb ft). The power steering return hose routes to the Power Steering Pump at this point. The power steering system requires bleeding as the final step.

OEM Cadillac DTS Power Steering Hose

4 Power Steering Hoses found

Cadillac DTS Power Steering Pressure Hose

Cadillac DTS Power Steering Return Hose

Cadillac DTS Oil Line, Passenger Side

Cadillac DTS Oil Line, Driver Side

Cadillac DTS Power Steering Hose

Cadillac DTS Power Steering Hose Parts Questions & Experts Answers

Related Cadillac DTS Parts

Browse Cadillac DTS Power Steering Hose by Years