Make sure this part fits

GM 26087551
Oil Line, Passenger Side

2001-2011 GM

Customer Questions & Expert Answers (23)
GM 26087551 Oil Line, Passenger Side
  • Part Description
    Pipe Kit, Steering Gear; Power Steering Hose
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCXL, CXS, Super8 Cyl 4.6 L GAS
    2001-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2002-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    2002-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2002-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26087551 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26087551 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after raising for the 2007 Buick Lucerne? Posted by Customer
    A:
    Remove the steering gear heat shield and place a drain pan under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you connect the new hose to the power steering pump for the 2008 Buick Lucerne? Posted by Customer
    A:
    Compress the clamp and connect the hose to the power steering pump, ensuring to follow the fastener notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done with the power steering return hose retainers for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Take out the power steering return hose retainers on the frame and remove the hose from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the hose for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2008 Buick Lucerne? Posted by Customer
    A:
    Attach the power steering pressure hose to the vehicle, ensuring to use 2 NEW washers when installing the power steering pressure hose banjo bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the power steering return hose (RHD) for the 2003 Cadillac Seville? Posted by Customer
    A:
    Install a drain pan under the vehicle and disconnect the power steering return hose from the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the hose be connected to the power steering pump for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Connect the hose to the power steering pump and tighten it to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Pressure Pipe/Hose (LZ9/LGD) (3.9L) for the 2010 Buick Lucerne? Posted by Customer
    A:
    Raise and support the vehicle and install drain pans underneath as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you remove the power steering return hose for the 2009 Buick Lucerne? Posted by Customer
    A:
    Take out the power steering return hose from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the hose be connected to the power steering gear for the 2009 Cadillac DTS? Posted by Customer
    A:
    Install the hose to the power steering gear, tightening it to 30 Nm (22 lb ft), and attach it to the wiring harness with a new tie strap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What components need to be removed next for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Remove the front air deflector and the power steering gear heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be reinstalled after securing the hose for the 2007 Cadillac DTS? Posted by Customer
    A:
    Reinstall the front air deflector and the power steering gear heat shield, then remove the drain pan and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2010 Cadillac DTS? Posted by Customer
    A:
    Place the new power steering return hose onto the vehicle and secure it to the frame brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2008 Cadillac DTS? Posted by Customer
    A:
    Place the new power steering return hose onto the vehicle and secure it to the frame brackets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Pressure Pipe/Hose for the 2007 Cadillac DTS? Posted by Customer
    A:
    Install a drain pan under the vehicle and remove the power steering pressure hose from the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What are the final steps after reinstalling the bracket for the 2002 Cadillac DeVille? Posted by Customer
    A:
    Reinstall the fascia extension panel and the power steering gear heat shield, lower the vehicle, and connect the power steering pressure hose to the power steering pump, tightening it to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you detach the power steering return hose for the 2006 Cadillac DTS? Posted by Customer
    A:
    Detach the power steering return hose from the wiring harness tie strap and from the frame brackets, then remove it from the power steering gear and finally from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Attach the power steering return hose to the vehicle and then to the frame brackets, ensuring to follow the fastener notice in service precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What components need to be removed next for the 2002 Cadillac Seville? Posted by Customer
    A:
    Remove the front air deflector and the power steering gear heat shield, followed by the power steering return hose from the frame brackets, wiring harness tie straps, and wiring harness clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for tightening the hose to the power steering gear for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Tighten it to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after completing the installation for the 2004 Cadillac Seville? Posted by Customer
    A:
    Remove the drain pan and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the final step in removing the power steering pressure hose for the 2006 Buick Lucerne? Posted by Customer
    A:
    Take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Oil Line, Passenger Side 26087551 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26087551 Oil Line, Passenger Side is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26087551 Oil Line, Passenger Side fits certain Cadillac DTS, DeVille, Seville models, as well as Buick Lucerne, Park Avenue. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 26087551 maintains top performance when functioning as the Pipe Kit, Steering Gear; Power Steering Hose unit at its Passenger Side. The component 26087551 is constructed from durable material and its dimensions span 19.0 x 6.2 x 1.0 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pipe Kit; Line Kit; Pipe Kit, Steering Gear Oil Pressure. The part 26087551 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.