Make sure this part fits

GM 19181867
Brake Pads

2005-2008 GM

Customer Questions & Expert Answers (8)
GM 19181867 Brake Pads
  • Part Description
    Pad Kit, Brake; Disc Brake Hardware Kit
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19181867 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19181867 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is used to push the brake caliper piston into the bore for the 2007 Buick Terraza? Posted by Customer
    A:
    A C-clamp is used over the top of the brake caliper against the back of the outboard brake pad.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the last step in the brake pad replacement process for the 2005 Buick Terraza? Posted by Customer
    A:
    Burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the correct procedure for installing new brake pads for the 2006 Buick Terraza? Posted by Customer
    A:
    Install the two brake pad retainers to the caliper bracket, ensuring the wear sensor is positioned correctly, then install the brake pads over the retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the next step after inspecting the fluid level for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What maintenance should be performed on the brake pad hardware for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Clean the brake pad hardware mating surfaces on the caliper bracket and check the brake pad retainer clips for corrosion, replacing them if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step to replace the front disc brake pads for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if the level is above midway, remove brake fluid to reach the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after inspecting the fluid level for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads 19181867 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19181867 Brake Pads is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19181867 Brake Pads fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 19181867 maintains top performance when functioning as the Pad Kit, Brake; Disc Brake Hardware Kit unit at its Rear. The component 19181867 is constructed from durable material and its dimensions span 10.4 x 4.8 x 3.3 inches while weighing 2.00 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Pads. The part 19181867 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.