Make sure this part fits

GM 12574833
Oil Pan

2001-2007 GM

Customer Questions & Expert Answers (9)
GM 12574833 Oil Pan
  • Part Description
    Pan, Engine Oil
  • Replaces
    12560248
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Suburban 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2006 GMC Sierra 2500 HDBase, SL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2007 GMC Sierra 2500 HD ClassicSL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2001-2006 GMC Sierra 3500Base, SL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2007 GMC Sierra 3500 ClassicSL, SLE, SLT, WT8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12574833 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12574833 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What sealant should be applied when installing the new oil pan for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Apply sealant GM 2346286 (Canadian P/N 10953472) to the sides of the front and rear crankshaft bearing caps at four locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What should be done with the oil pan gasket for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Drill out the oil pan gasket retaining rivets if necessary, then remove and discard the gasket and rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What is the final step in the installation process for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Raise the front drive axle into position, install the differential carrier upper mounting bolt and nut until snug, then install the lower mounting bolt and nut, tightening them to 100 Nm, followed by the inner axle housing washers and nuts to the bracket, also tightening them to 100 Nm. Finally, remove the jack from the front drive axle and install new engine oil and a new oil filter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What should be done after tightening the oil pan bolts for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Position the battery cable channel and install the battery cable channel bolt, tightening it to 9 Nm (80 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What is the next step after hanging the steering rack for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Place a suitable drain pan under the oil pan drain plug and remove the oil pan drain plug to allow it to drain completely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    Can the oil pan gasket be reused for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Yes, if it is undamaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What is the procedure for the 4L60-E automatic transmission for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Install the transmission bolt and stud on the right side until snug, and install the bottom bolt on the left side until snug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What should be done for the 4L80-E automatic transmission for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the transmission converter cover bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pan
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Oil Pan 12574833 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12574833 Oil Pan is available in the market under the name GM Oil Pan. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12574833 Oil Pan fits certain Chevrolet Silverado 2500 HD, Silverado 3500, Avalanche 2500 models, as well as GMC Sierra 2500 HD, Sierra 3500, Sierra 2500 HD Classic models.
The original GM component designated by manufacturer part number 12574833 maintains top performance when functioning as the Pan, Engine Oil unit. The component 12574833 is constructed from durable material and its dimensions span 27.3 x 13.0 x 13.1 inches while weighing 14.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12574833 has available replacement options 12560248. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.