Make sure this part fits

GM 25765149
Emblem, Front

2003-2009 GM

Customer Questions & Expert Answers (15)
GM 25765149 Emblem, Front
GM 25765149 Emblem, Front
  • Part Description
    Emblem, Radiator Grille And Front End Ornamentation
  • Position
    Front
  • Replaces
    25739143
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2007 Cadillac STSBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25765149 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25765149 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the emblem for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove either the loose wreath or crest from the grille, then eliminate the old emblem adhesive with a plastic flat-bladed tool and clean the area using 3M(R) P/N 07501 or an equivalent adhesive remover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the area be prepared for installation for the 2008 Cadillac SRX? Posted by Customer
    A:
    Wipe the area with a clean lint-free cloth moistened with a 50/50 mixture of isopropyl alcohol and water.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What preparation is needed before installing the new emblem for the 2003 Cadillac CTS? Posted by Customer
    A:
    Wipe the area with a clean lint-free cloth using a 50/50 mixture of isopropyl alcohol and water, taking care not to touch the adhesive tape or allow it to contact dirt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you remove the emblem/nameplate for the 2007 Cadillac CTS? Posted by Customer
    A:
    Carefully remove it with a small plastic flat-bladed tool to avoid damaging the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should you avoid touching during the installation for the 2004 Cadillac CTS? Posted by Customer
    A:
    Avoid touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the Radiator Grille Emblem for the 2007 Cadillac CTS? Posted by Customer
    A:
    Gather the necessary tools, specifically a Heat Gun (J 25070).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the next step after cleaning the area for the 2004 Cadillac CTS? Posted by Customer
    A:
    Wash the area with warm soap and water, then dry it with a lint-free cloth.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after removing the emblem/nameplate for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove all adhesive from the surface as specified.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you mark the location for the new emblem/nameplate for the 2007 Cadillac SRX? Posted by Customer
    A:
    Apply tape and measure 130 mm (5.12 in) from the horizontal edge and 80 mm (3.12 in) from the vertical edge of the liftgate, with an additional 12 mm (0.5 in) for export units from the bottom edge of the "SRX" emblem.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the area be cleaned after removing the adhesive for the 2004 Cadillac SRX? Posted by Customer
    A:
    Wash the area with warm soapy water and dry it with a lint-free cloth.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What tool should be used to remove the emblem/nameplate for the 2005 Cadillac STS? Posted by Customer
    A:
    Carefully remove it with a plastic, flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done if the location is unmarked for the 2007 Cadillac STS? Posted by Customer
    A:
    Apply tape and mark it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you mark the location for the new emblem/nameplate for the 2009 Cadillac SRX? Posted by Customer
    A:
    Apply tape and measure 130 mm (5.12 in) from the horizontal edge and 80 mm (3.12 in) from the vertical edge of the liftgate, with an additional 12 mm (0.5 in) for export units from the bottom edge of the "SRX" emblem.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be avoided when handling the emblem/nameplate for the 2005 Cadillac SRX? Posted by Customer
    A:
    Avoid touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Emblem, Front 25765149 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25765149 Emblem, Front is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25765149 Emblem, Front fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 25765149 maintains top performance when functioning as the Emblem, Radiator Grille And Front End Ornamentation unit at its Front. The component 25765149 is constructed from durable material and its dimensions span 3.3 x 3.1 x 3.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25765149 has available replacement options 25739143. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.