Make sure this part fits

GM 25956572
Coolant Hose

2008-2013 GM

Customer Questions & Expert Answers (12)
GM 25956572 Coolant Hose
  • Part Description
    Hose Assembly-Radiator Surge Tank Outlet; Radiator Hose
  • Replaces
    25805078
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2013 Cadillac EscaladeHybrid, Hybrid Platinum8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2009-2013 Chevrolet Silverado 1500Hybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2008-2013 Chevrolet TahoeHybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2009-2013 GMC Sierra 1500Hybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    2008-2013 GMC YukonDenali Hybrid, Hybrid8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25956572 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25956572 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if coolant air bleed covers (313) are applicable for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Install the coolant air bleed covers (313) and seals (308), followed by the coolant air bleed cover bolts (312) tightened to 12 Nm (106 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after disengaging the outlet hose for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Reposition the surge tank outlet hose clamp at the surge tank, then remove the surge tank outlet hose from the surge tank and the water pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step to replace the water outlet tube (LU3) for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    First, remove the air cleaner outlet resonator duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after installing the hose to the surge tank for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the surge tank inlet hose to the radiator and position the surge tank inlet hose clamp to the radiator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after removing the intake manifold for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the air cleaner outlet duct and drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the hose from the radiator for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Reposition the surge tank inlet hose clamp at the surge tank and remove the surge tank inlet hose from the surge tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the final step in the process for the 2010 GMC Yukon? Posted by Customer
    A:
    Reattach the radiator vent inlet hose to the coolant air bleed pipe fitting and position the radiator vent inlet hose clamp, then install the air cleaner outlet duct, fill the cooling system, and if the rear coolant air bleed covers were replaced, reinstall the intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What if it is not equipped with RPO C36 auxiliary heater for the 2008 GMC Yukon? Posted by Customer
    A:
    Remove the surge tank/heater outlet hose from the mounting clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after removing the intake manifold for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Take off the air cleaner outlet duct and drain the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is required if equipped with RPO C36 during installation for the 2010 GMC Yukon? Posted by Customer
    A:
    Connect the surge tank outlet hose to the heater and blower module, ensuring it clicks into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the hose from the radiator for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Reposition the surge tank inlet hose clamp at the surge tank and remove the surge tank inlet hose from the surge tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Coolant Hose 25956572 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25956572 Coolant Hose is available in the market under the name GM Cooling Hose, Coolant Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25956572 Coolant Hose fits certain Chevrolet Tahoe, Silverado 1500 models, as well as GMC Sierra 1500, Yukon. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by manufacturer part number 25956572 maintains top performance when functioning as the Hose Assembly-Radiator Surge Tank Outlet; Radiator Hose unit. The component 25956572 is constructed from durable material and its dimensions span 27.0 x 14.7 x 14.6 inches while weighing 1.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Outlet Hose; Hose, Engine Coolant Recovery. The part 25956572 has available replacement options 25805078. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.