Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10363025
Belt Weatherstrip, Front Outer Passenger Side

1999-2007 GM

Customer Questions & Expert Answers (40)
GM 10363025 Belt Weatherstrip, Front Outer Passenger Side
GM 10363025 Belt Weatherstrip, Front Outer Passenger Side
GM 10363025 Belt Weatherstrip, Front Outer Passenger Side
  • Part Description
    Sealing Strip, Front Side Door Window Outer
  • Position
    Front Outer Passenger Side
  • Replaces
    15041968, 15703348, 15035882, 15104015, 15758042
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 10363025 Belt Weatherstrip, Front Outer Passenger Side is Ref No. 1 in the diagram below

    2003 GMC Yukon Belt Weatherstrip, Front Outer Passenger Side Diagram for 10363025
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10363025

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 10363025 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10363025 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the minimum temperature required for the weatherstrip installation for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Ensure the weatherstrip is at a minimum of 21°C (70°F) before starting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after hooking the new sealing strip into the window run channel for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Lower it and press it into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What temperature should the weatherstrip be at for installation for the 2003 Cadillac Escalade? Posted by Customer
    A:
    The weatherstrip should be at a minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the midgate upper weatherstrip for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Fold down the rear seat and remove the rear removable glass panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after closing the midgate for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Reinstall the rear removable glass panel and inspect the weatherstrip to ensure it is properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window weatherstrip for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the tailgate weatherstrip for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Open the endgate and pull the weatherstrip from either side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the necessary components for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Peel the weatherstrip from the rear side door opening away from the channel, pulling it from the pinchweld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new weatherstrip for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Close the endgate and inspect for any interference.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be removed for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Begin removing the weatherstrip from one end of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after reinstalling the glass panel for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Inspect the weatherstrip with the midgate closed and the glass panel in place, then return the rear seat to the upright position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after aligning the new weatherstrip for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the weatherstrip onto the pinch-weld flange, making sure it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old weather-strip for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Push the new weather-strip over the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Why is it important to apply the new weatherstrip in a clean environment for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    A clean environment is important to prevent dust or dirt from interfering with the adhesive backing, as foreign material may cause improper adhesion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the weatherstrip for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the window, the water deflector, and the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you detach the weatherstrip from the rear side door opening for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Pull it away from the channel to separate it from the pinchweld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Close the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the weatherstrip for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the window, the water deflector, and the door trim panel, and finally, inspect the operation of the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first action to take when installing the new weatherstrip for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Peel off the backing paper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window glass weatherstrip for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the trim pieces for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Take out the weatherstrip from the rear side door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after installing the new weatherstrip for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Close the endgate and inspect for any interference.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the outer belt sealing strip on the front door window for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    First, lower the window and remove the outside mirror.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after lowering the window for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the outer sealing strip from the door, ensuring not to disturb the inner sealing strip attached to the glass run channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip from the liftgate for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Open the liftgate and remove the weatherstrip molding from the pinch-weld flange by firmly gripping it and carefully pulling it out and away from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Align the paint mark on the weatherstrip to the outer top center of the pinch weld flange, then push the weatherstrip onto the flange, starting from the top center of the endgate opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the weatherstrip for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Reinstall the midgate and close it, then install the rear removable glass panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the hood rear seal for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    First, pull up on the rear hood seal and remove it from the cowl pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door weatherstrip for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Open the door and remove the sill plate, hinge pillar trim panel, and windshield pillar molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after the door trim panel for the 2006 GMC Yukon? Posted by Customer
    A:
    Remove the water deflector and the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the new weatherstrip be placed during installation for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Place the new weatherstrip in the same locations: the front of the glass run channel, the top of the window frame flange, and the rear of the glass run channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the rear hood seal for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    First, pull up on the rear hood seal and remove it from the cowl pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reinstall the sunroof window to the sunroof module assembly and verify that there are no air or water leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Position the weatherstrip onto the door opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What are the final steps after installing the weatherstrip for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reinstall the window, the water deflector, and the door trim panel, and finally, inspect the operation of the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the necessary components for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Peel the weatherstrip away from the channel at the rear side door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reinstall the front door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door opening weatherstrip on an extended cab for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    First, remove the front and rear door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Position the new weatherstrip into the rear side door opening, ensuring it is fully seated in the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Belt Weatherstrip, Front Outer Passenger Side 10363025 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10363025 Belt Weatherstrip, Front Outer Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10363025 Belt Weatherstrip, Front Outer Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 10363025 maintains top performance when functioning as the Sealing Strip, Front Side Door Window Outer unit at its Front Outer Passenger Side. The component 10363025 is constructed from durable material and its dimensions span 36.6 x 4.1 x 0.8 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sealing Strip, Side Door Window Glass. The part 10363025 has available replacement options 15041968, 15703348, 15035882, 15104015, 15758042. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.