Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15883322
Window Switch, Driver Side

2003-2007 GM

Customer Questions & Expert Answers (22)
GM 15883322 Window Switch, Driver Side
GM 15883322 Window Switch, Driver Side
GM 15883322 Window Switch, Driver Side
GM 15883322 Window Switch, Driver Side
GM 15883322 Window Switch, Driver Side
  • Part Description
    Switch Assembly-Door Lock & Side Window
  • Position
    Driver Side
  • Replaces
    15202848, 15186212, 15112969, 10398567, 15125140
  • Manufacturer
    General Motors
Make sure this part fits
$183.41 MSRP: $274.15
You Save: $90.74 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 15883322 Window Switch, Driver Side is Ref No. 5 in the diagram below

    2006 Chevy Silverado 1500 Window Switch, Driver Side Diagram for 15883322
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15883322

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Cadillac EscaladeBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2006 Chevrolet Avalanche 1500LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 Chevrolet Avalanche 2500LS, LT8 Cyl 8.1 L GAS
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15883322 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15883322 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the door module back into the switch panel bezel for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Insert the door module into the switch panel bezel until it clicks into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    How do you remove the power window switch from the rear door for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Carefully pry the door power window switch from the door trim panel using a small flat-bladed tool, then disconnect the electrical connector from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What tool is recommended to release the retaining clips on the door module for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What tool is recommended to release the retaining clips on the door module for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after removing the front door trim panel for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the screw that retains the switch panel bezel from the front door panel and carefully detach the bezel using a flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What should be done after removing the front door trim panel for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Take out the screw that secures the switch panel bezel to the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the final step after reinstalling the front door trim panel for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Perform the necessary setup and programming procedures, ensuring to follow the guidelines for programming and setup information.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after securing the switch panel bezel for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reconnect the electrical connectors and reinstall the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    How do you secure the switch panel bezel back to the front door trim panel for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Position the switch panel bezel and module back into the door trim panel and secure it with the screw, tightening it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you release the retaining clips on the door module for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool to release the retaining clips on both sides of the door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you release the door module from the switch panel bezel for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool to release the retaining clips on both sides of the door module, then remove the door module from the switch panel bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What additional step is needed if equipped with camper mirrors for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Program the door module using the Service Programming System (SPS).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after removing the switch for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Disconnect the electrical connector from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the first step to replace the rear side door window switch for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Use a small flat-bladed tool to carefully pry the door power window switch from the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the installation process for the door module for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Insert the door module into the switch panel bezel until it snaps into place, then attach the bezel and module to the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after removing the switch for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Disconnect the electrical connector from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the installation process for the door module for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Insert the door module into the switch panel bezel until it snaps into place, then attach the switch panel bezel and module to the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after removing the switch for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Disconnect the electrical connector from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What should be done after removing the front door trim panel for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Take out the screw that secures the switch panel bezel to the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    How do you remove the door module from the switch panel bezel for the 2006 GMC Yukon? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool to release the retaining clips on both sides of the door module, then remove the door module from the switch panel bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after removing the switch for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Disconnect the electrical connector from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Switch, Driver Side 15883322 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15883322 Window Switch, Driver Side is available in the market under the name GM Power Window Switch, Door Lock Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15883322 Window Switch, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15883322 maintains top performance when functioning as the Switch Assembly-Door Lock & Side Window unit at its Driver Side. The component 15883322 is constructed from durable material and its dimensions span 8.5 x 3.2 x 3.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch; Switch, Door And End Gate Electrical. The part 15883322 has available replacement options 15202848, 15186212, 15112969, 10398567, 15125140. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.