Make sure this part fits

GM 22783651
A/C Line, Rear

2004-2013 GM

Customer Questions & Expert Answers (11)
GM 22783651 A/C Line, Rear
  • Part Description
    Tube Assembly-A/C Evaporator Thermal Expansion Valve Rear; A/C Refrigerant Liquid Hose; A/C Hose
  • Position
    Rear
  • Replaces
    10441359, 15251673
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22783651 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22783651 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2007 Cadillac XLR? Posted by Customer
    A:
    Install the front evaporator inlet line to the vehicle and connect the surge tank outlet hose and the inlet heater hose to the underhood junction box retainer clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the torque specification for the TXV block fitting nut for the 2009 Cadillac XLR? Posted by Customer
    A:
    Tighten the TXV block fitting nut to 20 Nm (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the final step after reconnecting the A/C tube connector at the evaporator rear line assembly for the 2009 Cadillac XLR? Posted by Customer
    A:
    Install the battery, evacuate and recharge the A/C system, and leak test the fittings of the component using J 39400-A.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    How do you disconnect the front evaporator inlet line for the 2008 Cadillac XLR? Posted by Customer
    A:
    Disconnect it from the body retaining clip and the refrigerant pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after disconnecting the hose assembly from the A/C condenser fitting for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Remove the sealing washer and cap or tape off the A/C condenser fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What components need to be disconnected from the TXV for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect the heater pipe bracket retaining nut from the cowl stud, the thermal expansion valve (TXV) block fitting nut, and the evaporator rear line assembly from the TXV and the retainer bracket stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    How do you disconnect the front evaporator inlet line for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect it from the body retaining clip and the refrigerant pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be connected after the A/C compressor line and front evaporator line for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    The A/C tube connectors onto the evaporator rear line assembly and the refrigerant pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What are the final steps to complete the process for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Connect the A/C tube connector at the evaporator rear line assembly, install the battery, evacuate and recharge the A/C system, and leak test the fittings of the component using the Halogen Leak Detector (J 39400-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after disconnecting the hose assembly from the condenser for the 2007 Cadillac XLR? Posted by Customer
    A:
    Cap or tape off the A/C condenser fitting, then disconnect and remove the A/C tube connector from the evaporator outlet tube and the A/C compressor hose assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM A/C Line, Rear 22783651 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22783651 A/C Line, Rear is available in the market under the name GM A/C Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22783651 A/C Line, Rear fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 22783651 maintains top performance when functioning as the Tube Assembly-A/C Evaporator Thermal Expansion Valve Rear; A/C Refrigerant Liquid Hose; A/C Hose unit at its Rear. The component 22783651 is constructed from durable material and its dimensions span 32.4 x 9.0 x 8.9 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Tube, A/C Refrigerant (All Metal). The part 22783651 has available replacement options 10441359, 15251673. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.