How to overhaul the front brake calipers (J55) on 2000 Cadillac DeVille?

Tool collection for front brake caliper overhaul (J55) starts with the following items: boot installer (J 26267). Boot installer (J 26267). Start the process by pulling out the brake caliper from the vehicle. When using low pressure compressed air to perform Piston removal through the caliper inlet hole on the back you must protect your fingers. Use a small plastic or wood tool to carefully extract the Piston boot and seal and protect both the caliper bore and seal groove from damage. The procedure involves removing first the Piston boots and seals after which comes stripping the bleeder valve and cap. All parts need cleaning with denatured alcohol before they get dried by low-pressure compressed air without lubrication until all caliper body and bleeder valve passageways become free of debris. The inspection of pistons should include a check for scoring, nicks, cracks, wear and corrosion where replacement with new parts is necessary. Utilize crocus cloth to polish out light caliper bore corrosion yet avoid performing any bore honing procedure. Replace the caliper if necessary. The caliper must be replaced if any nicks or burrs exist inside the seal groove. Installation starts with putting the bleeder valve cap and bleeder valve back into place inside the caliper before adding new Piston seals. Before installation, apply clean brake fluid to lubricate the seals. Now install the new Piston boots over each Piston before placing the pistons at the bottom of the caliper bore. Afterward you can reinstall the caliper onto your vehicle.

OEM 2000 Cadillac DeVille Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Calipers found

View related parts
2000 Cadillac DeVille Caliper, Front Driver Side
Part Number: 18046196
$145.18 MSRP: $284.26
You Save: $139.08 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly, Front Brake (Service); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 18029818
- Item Weight: 9.80 Pounds
- Item Dimensions: 9.5 x 8.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18046196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, Concours, d'Elegance, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Caliper, Front Passenger Side
Part Number: 18046197
Product Specifications
- Other Name: Caliper Assembly, Front Brake (Service); Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 18029819
- Item Weight: 10.40 Pounds
- Item Dimensions: 7.8 x 9.0 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18046197
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, Concours, d'Elegance, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Caliper
Part Number: 89047652
Product Specifications
- Other Name: Caliper Assembly, Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18042414
- Item Weight: 6.20 Pounds
- Item Dimensions: 9.8 x 7.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047652
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Caliper
Part Number: 89047654
Product Specifications
- Other Name: Caliper Assembly, Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Item Weight: 10.30 Pounds
- Item Dimensions: 12.4 x 10.3 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Caliper
Part Number: 89047653
Product Specifications
- Other Name: Caliper Assembly, Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18043184
- Item Weight: 6.30 Pounds
- Item Dimensions: 13.0 x 10.1 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047653
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Overhaul Kit, Rear
Part Number: 18042415
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Overhaul Kit; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.7 x 3.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18042415
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Overhaul Kit, Front
Part Number: 18017156
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Overhaul Kit; Wheel Brake Cylinder/Caliper Piston Kit.
- Position: Front
- Replaces: 18024958
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.9 x 3.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18017156
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, Concours, d'Elegance, DHS, DTS, Protection Series, Spring Edition, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

2000 Cadillac DeVille Brake Calipers

With a comprehensive array of OEM 2000 Cadillac DeVille Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac DeVille Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac DeVille Parts Questions & Experts Answers

Q: How to overhaul the front brake calipers (J55) on 2000 Cadillac DeVille?
A: Tool collection for front brake caliper overhaul (J55) starts with the following items: boot installer (J 26267). Boot installer (J 26267). Start the process by pulling out the brake caliper from the vehicle. When using low pressure compressed air to perform Piston removal through the caliper inlet hole on the back you must protect your fingers. Use a small plastic or wood tool to carefully extract the Piston boot and seal and protect both the caliper bore and seal groove from damage. The procedure involves removing first the Piston boots and seals after which comes stripping the bleeder valve and cap. All parts need cleaning with denatured alcohol before they get dried by low-pressure compressed air without lubrication until all caliper body and bleeder valve passageways become free of debris. The inspection of pistons should include a check for scoring, nicks, cracks, wear and corrosion where replacement with new parts is necessary. Utilize crocus cloth to polish out light caliper bore corrosion yet avoid performing any bore honing procedure. Replace the caliper if necessary. The caliper must be replaced if any nicks or burrs exist inside the seal groove. Installation starts with putting the bleeder valve cap and bleeder valve back into place inside the caliper before adding new Piston seals. Before installation, apply clean brake fluid to lubricate the seals. Now install the new Piston boots over each Piston before placing the pistons at the bottom of the caliper bore. Afterward you can reinstall the caliper onto your vehicle.