How to replace the hydraulic hose on 2003 Cadillac CTS?

Start the hydraulic Clutch Hose replacement by unbolting the surge tank and relocating the coolant surge tank away from the work area. Keep the coolants in their lines and avoid draining their content before further procedure. Begin by retracting the clutch Hydraulic Hose retaining clip which secures the Clutch Master Cylinder along with putting a cap or plug onto exposed hose and Clutch Master Cylinder fittings to protect against fluid loss and contamination. Begin by disconnecting the clutch Hydraulic Hose from both its points at the Clutch Master Cylinder and then raise the vehicle for support. When dealing with the Clutch Slave Cylinder's Hydraulic Hose and retaining clip remove the component but maintain the hose end open since check valves control fluid loss. Extract the clutch Hydraulic Hose from your vehicle's components. Installing the clutch Hydraulic Hose retaining clip begins by attaching it to the Clutch Slave Cylinder position. The hose must maintain an upward route above the slave cylinder and avoid sharp bends, kinks, or downward loops including contact with sharp or potentially hot components. To install the clutch Hydraulic Hose on the vehicle place the locating tab in the notch of the slave cylinder hose fitting while pushing the clutch Hydraulic Hose deep into the Clutch Slave Cylinder until a "click" sound occurs. After checking that the clutch Hydraulic Hose remains secure, slowly lower the vehicle. Push the clutch Hydraulic Hose into the Clutch Master Cylinder until a "click" sound occurs. Following this, perform a gentle tug to validate proper retention. Bleeding must occur for the clutch hydraulic system and the detention of the surge tank at its proper positioning must be done before securing surge tank bolts.

OEM 2003 Cadillac CTS Hydraulic Hose

Brake Hydraulic Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hydraulic Hoses found

View related parts
2003 Cadillac CTS Flex Hose, Front
Part Number: 19256891
$22.77 MSRP: $42.76
You Save: $19.99 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Kit, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose Kit, Hydraulic Brake
- Position: Front
- Replaces: 15933097, 15875854
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.2 x 7.7 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19256891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac CTS Flex Hose, Front Passenger Side
Part Number: 19256888
$22.77 MSRP: $42.76
You Save: $19.99 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Kit, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose Kit, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15875853, 15933096
- Item Weight: 1.00 Pounds
- Item Dimensions: 12.5 x 8.2 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19256888
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Cadillac CTS Power Steering Pressure Hose
Part Number: 89060185
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Power Steering Hose; Lower Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.90 Pounds
- Item Dimensions: 23.7 x 8.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89060185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS
View related parts
2003 Cadillac CTS Flex Hose, Rear
Part Number: 19366715
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15933093, 19331546, 15257487, 15875848
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 2.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
2003 Cadillac CTS Power Steering Return Hose
Part Number: 25741817
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Upper Pressure Hose
- Item Weight: 0.90 Pounds
- Item Dimensions: 32.3 x 17.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25741817
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS
View related parts
2003 Cadillac CTS Power Steering Return Hose
Part Number: 25741816
Product Specifications
- Other Name: Hose, Power Steering Gear Outlet; Power Steering Hose; Return Hose; Lower Return Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.1 x 4.4 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25741816
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS
View related parts
2003 Cadillac CTS Power Steering Return Hose
Part Number: 25768049
Product Specifications
- Other Name: Hose, Power Steering Fluid Reservoir Outlet; Power Steering Hose; Reservoir Hose; Hose, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 12.2 x 2.2 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25768049
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS
View related parts
2003 Cadillac CTS Flex Hose, Rear
Part Number: 19366713
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15244147, 15933091, 25767147, 15875845
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.9 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
- Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS

2003 Cadillac CTS Hydraulic Hose

With a comprehensive array of OEM 2003 Cadillac CTS Hydraulic Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Hydraulic Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac CTS Parts Questions & Experts Answers

Q: How to replace the hydraulic hose on 2003 Cadillac CTS?
A: Start the hydraulic Clutch Hose replacement by unbolting the surge tank and relocating the coolant surge tank away from the work area. Keep the coolants in their lines and avoid draining their content before further procedure. Begin by retracting the clutch Hydraulic Hose retaining clip which secures the Clutch Master Cylinder along with putting a cap or plug onto exposed hose and Clutch Master Cylinder fittings to protect against fluid loss and contamination. Begin by disconnecting the clutch Hydraulic Hose from both its points at the Clutch Master Cylinder and then raise the vehicle for support. When dealing with the Clutch Slave Cylinder's Hydraulic Hose and retaining clip remove the component but maintain the hose end open since check valves control fluid loss. Extract the clutch Hydraulic Hose from your vehicle's components. Installing the clutch Hydraulic Hose retaining clip begins by attaching it to the Clutch Slave Cylinder position. The hose must maintain an upward route above the slave cylinder and avoid sharp bends, kinks, or downward loops including contact with sharp or potentially hot components. To install the clutch Hydraulic Hose on the vehicle place the locating tab in the notch of the slave cylinder hose fitting while pushing the clutch Hydraulic Hose deep into the Clutch Slave Cylinder until a "click" sound occurs. After checking that the clutch Hydraulic Hose remains secure, slowly lower the vehicle. Push the clutch Hydraulic Hose into the Clutch Master Cylinder until a "click" sound occurs. Following this, perform a gentle tug to validate proper retention. Bleeding must occur for the clutch hydraulic system and the detention of the surge tank at its proper positioning must be done before securing surge tank bolts.

Related 2003 Cadillac CTS Parts

Alternate Year Models

2004 Cadillac CTS Hydraulic Hose