OEM 2006 Buick Rendezvous Spark Plug Wires

2006 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the Spark Plug Wires on 2006 Buick Rendezvous?

  A: Before initiating spark plug wire replacement start by collecting the engine tilt strap (J 41131) and appropriate tools. Start work by taking off the intake manifold cover followed by disconnecting Spark Plug Wires (2, 4, and 6) from left side spark plugs and the Spark Plug Wires until wires detach from retaining clips and the engine. Better access to the rear requires engine rotation before removing Spark Plug Wires (1, 3 or 5) from the right side spark plugs and Spark Plug Wires and finally from the retaining clip and engine. When replacing your Spark Plug Wires you must move over all components consisting of spark plug wire conduit and retaining clips. Installation involves securing new Spark Plug Wires onto their corresponding engine location and positioning them within the retaining clips. To begin reinstallation secure the left and right Spark Plug Wires (1, 3 and 5 to Spark Plug Wires and right spark plugs then let go of the Engine Tilt Strap (J 41131) and remove it. You should install engine mount struts after securing Spark Plug Wires in retaining clips then connect wires (2, 4 or 6) to the Spark Plug Wires and left side spark plugs before putting back the intake manifold cover.