How to replace the front fender emblem and nameplate on 2008 Cadillac XLR?

Before replacing front fender emblems or nameplates on XLR models use tape to protect mounting areas then mark alignment points with additional tape. A J 25070 (Heat Gun) should be used to heat the emblem/nameplate in circular patterns for 30 seconds while positioned 152 mm (6 in) away from the surface. You need to use a plastic flat-blade tool to carefully take out the emblem/nameplate. You should begin by cleaning the area with a lint-free cloth alongside Varnish Makers and Painters (VMP) naphtha or a mixture of isopropyl alcohol and water in a 50/50 ratio before starting installation. In unmarked locations apply tape then measure according to these specifications: Dimension (a) sets fender edge to nameplate at 108 mm (4.25 in) and Dimension (b) determines bottom fender distance to nameplate at 305 mm (12 in). There are two measurements to follow: Dimension (a) represents 108 mm (4.25 in) from the fender's trailing edge to the product's edge and Dimension (b) shows 305 mm (12 in) from the fender base to the product's location. Use J 25070 (Heat Gun) to preheat the mounting surface to 27-41°C (80-105°F) then position the emblem/nameplate to a temperature of 29-32°C (85-90°F). Deadly handle the adhesive backing instead carefully peel off the protective liner attached to the emblem/nameplate's back side. Approach the mounting surface with the emblem/nameplate then apply equal pressure to its surface until it bonds uniformly. The last step encompasses removing tape from the surface area.

OEM 2008 Cadillac XLR Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Emblems found

View related parts
2008 Cadillac XLR Emblem, Front Part Number: 15851892
$108.14 MSRP: $154.73
You Save: $46.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name; Nameplate; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate; Emblem, Front Side Door
- Position: Front
- Replaces: 25754866
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.9 x 1.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15851892
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Center Cap, Black Part Number: 9596629
$47.99 MSRP: $68.66
You Save: $20.67 (31%)
ADD TO CART
Product Specifications
- Other Name: Cap-Hub Polished 19" Wheels *Black Backgr; Wheel Center Cap; Hub Cap; Emblem; Emblem, Wheel Cover Appearance; Cap, Wheel - Front And Rear; Cap, Wheel Trim
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.8 x 4.7 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9596629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Emblem Part Number: 84689784
$11.42 MSRP: $17.00
You Save: $5.58 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Emblem Part Number: 10334204
Product Specifications
- Other Name: Emblem, Tail Lamp
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.7 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334204
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Emblem, Front Part Number: 10334202
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 2.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334202
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Nameplate, Rear Part Number: 10387855
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Emblem, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Replaces: 10372469, 25739124, 25762472
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.9 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10387855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Nameplate, Front Part Number: 15810646
$63.71 MSRP: $94.82
You Save: $31.11 (33%)
Product Specifications
- Other Name: Emblem, Front Side Door
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 14.6 x 1.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15810646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Emblem Part Number: 25757717
Product Specifications
- Other Name: Emblem, Bumper/Fascia
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.0 x 5.3 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25757717
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Nameplate, Rear Part Number: 10334040
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.3 x 1.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Emblem, Front Part Number: 10333719
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.5 x 5.7 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10333719
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Emblem, Front Part Number: 15233934
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 1.5 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233934
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Emblem Part Number: 10291759
$5.34 MSRP: $7.95
You Save: $2.61 (33%)
Product Specifications
- Other Name: Emblem, Radio Auxiliary Speakers
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.3 x 1.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10291759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2008 Cadillac XLR Emblem

With a comprehensive array of OEM 2008 Cadillac XLR Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac XLR Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac XLR Emblem Parts and Q&A

Q: How to replace the front fender emblem and nameplate on 2008 Cadillac XLR?
A: Before replacing front fender emblems or nameplates on XLR models use tape to protect mounting areas then mark alignment points with additional tape. A J 25070 (Heat Gun) should be used to heat the emblem/nameplate in circular patterns for 30 seconds while positioned 152 mm (6 in) away from the surface. You need to use a plastic flat-blade tool to carefully take out the emblem/nameplate. You should begin by cleaning the area with a lint-free cloth alongside Varnish Makers and Painters (VMP) naphtha or a mixture of isopropyl alcohol and water in a 50/50 ratio before starting installation. In unmarked locations apply tape then measure according to these specifications: Dimension (a) sets fender edge to nameplate at 108 mm (4.25 in) and Dimension (b) determines bottom fender distance to nameplate at 305 mm (12 in). There are two measurements to follow: Dimension (a) represents 108 mm (4.25 in) from the fender's trailing edge to the product's edge and Dimension (b) shows 305 mm (12 in) from the fender base to the product's location. Use J 25070 (Heat Gun) to preheat the mounting surface to 27-41°C (80-105°F) then position the emblem/nameplate to a temperature of 29-32°C (85-90°F). Deadly handle the adhesive backing instead carefully peel off the protective liner attached to the emblem/nameplate's back side. Approach the mounting surface with the emblem/nameplate then apply equal pressure to its surface until it bonds uniformly. The last step encompasses removing tape from the surface area.