How to replace the Spark Plug Wires on Buick Lucerne?

To change the Spark Plug Wires, start by removing the intake manifold cover. Next, remove the front Spark Plug Wires from the ignition coils, then rear Spark Plug Wires. For the front Spark Plug Wires, make note of their positions before removal and twist the spark plug boot 1/2 turn and gently pry heat shield up from spark plugs with a spark plug boot removal tool (K J 38491) and remove the wires. Then remove the spark plug harness from the retainer and remove the air inlet grille. Repeat the steps for the rear Spark Plug Wires making sure that their positions are marked, twist the boots and use the spark plug boot removal tool (J 38491) while using the tool to pry the heat shield away before pulling out. Last, pull the spark plug retainers from the rear lift bracket and Fuel Rail. For installation, security would start with the placement of the Spark Plug Wires to the spark plugs back of the engine alternatively the retainers for the plug are to the back lift bracket and after this adjust the Fuel Rail. We then reinstall the air inlet grille, attach the Spark Plug Wires to the spark plugs that are in the front of the engine, attach the spark plug harness to the retainer, and connect the rear Spark Plug Wires and front Spark Plug Wires to the ignition coils. Reinstall the intake manifold cover at the end.

OEM Buick Lucerne Spark Plug Wires

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Spark Plug Wires found

View related parts
Buick Lucerne Wire Harness
Part Number: 12602860
$68.63 MSRP: $137.81
You Save: $69.18 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Harness, Spark Plug Or Coil; Harness; Wire
- Replaces: 12594177
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Cable Set
Part Number: 19417604
$62.10 MSRP: $135.59
You Save: $73.49 (55%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12192454, 12192191, 12192468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Lucerne Cable Set
Part Number: 19417611
$96.13 MSRP: $208.08
You Save: $111.95 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 89017743, 19351586
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Buick Lucerne | CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Plug Wire Set, Driver Side
Part Number: 12635742
$37.05 MSRP: $69.12
You Save: $32.07 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Harness Assembly-Spark Plug Wire; Harness, Spark Or Glow Plug Ignition; Spark Plug Wire
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Cable Set
Part Number: 12192470
$44.44 MSRP: $97.02
You Save: $52.58 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Ignition Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12192189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Lucerne Plug Wire Set, Passenger Side
Part Number: 12635741
Product Specifications
- Other Name: Harness Assembly-Spark Plug Wire; Harness, Spark Or Glow Plug Ignition; Spark Plug Wire
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Buick Lucerne Spark Plug Wires

Our website offers an extensive catalog of genuine Buick Lucerne Spark Plug Wires at unbeatable prices. Every OEM Buick Lucerne Spark Plug Wires comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Lucerne Spark Plug Wires Parts Questions & Experts Answers

Cable Set
19417604
Q: How to replace the Spark Plug Wires on Buick Lucerne?
A: To change the Spark Plug Wires, start by removing the intake manifold cover. Next, remove the front Spark Plug Wires from the Ignition Coils, then rear Spark Plug Wires. For the front Spark Plug Wires, make note of their positions before removal and twist the spark plug boot 1/2 turn and gently pry heat shield up from spark plugs with a spark plug boot removal tool (K J 38491) and remove the wires. Then remove the spark plug harness from the retainer and remove the air inlet grille. Repeat the steps for the rear Spark Plug Wires making sure that their positions are marked, twist the boots and use the spark plug boot removal tool (J 38491) while using the tool to pry the heat shield away before pulling out. Last, pull the spark plug retainers from the rear lift bracket and Fuel Rail. For installation, security would start with the placement of the Spark Plug Wires to the spark plugs back of the engine alternatively the retainers for the plug are to the back lift bracket and after this adjust the Fuel Rail. We then reinstall the air inlet grille, attach the Spark Plug Wires to the spark plugs that are in the front of the engine, attach the spark plug harness to the retainer, and connect the rear Spark Plug Wires and front Spark Plug Wires to the ignition coils. Reinstall the intake manifold cover at the end.