How to replace the power steering pump on Buick Park Avenue?

Before starting the Power Steering Pump replacement you must remove the Drive Belt then safely hoist the vehicle. A drain pan should be installed underneath the vehicle after which you can disconnect the power steering pressure hose and return hose from the pump along with the wiring harness. You must eliminate the right outer tie rod retaining nut along with the antilock brake wiring harness bracket. First remove the Power Steering Pump retaining bolts then disconnect the right outer tie rod and the Power Steering Pump. You can use the steering linkage and tie rod puller (J 24319-B) to take out the outer tie rod from the Steering Knuckle. Move the power steering pulley if it becomes needed during removal. The Power Steering Pump installation should start with placing it onto the engine followed by bolt installation at 27 nm (20 ft. Lbs.) torque. After budging the wiring harness you must install the antilock brake wiring harness bracket. The right outer tie rod requires installation to the Steering Knuckle before torquing the outer tie rod retaining nut to 75 nm (55 ft. Lbs.). You should connect the power steering pressure hose followed by tight torque to 27 nm (20 ft. Lbs.). Complete the procedure by joining the power steering return hose. After lowering the vehicle users must install the Drive Belt then bleed the power steering system while conducting a leak inspection.

OEM Buick Park Avenue Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Power Steering Pumps found

View related parts
Buick Park Avenue Power Steering Pump
Part Number: 26035305
$206.05 MSRP: $308.00
You Save: $101.95 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering; Power Steering Pump Assy
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Power Steering Pump
Part Number: 26043363
$218.27 MSRP: $343.43
You Save: $125.16 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Power Steering (W/O Reservoir & Cap); Power Steering Pump Assy
- Replaced by: 19433009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Power Steering Pump
Part Number: 26025515
Product Specifications
- Other Name: Pump Assembly-Power Steering; Power Steering Rebuild Kit; Seal Kit; Pump, Power Steering
- Replaces: 26014395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Power Steering Pump
Part Number: 26031483
Product Specifications
- Other Name: Pump Assembly-Power Steering; Power Steering Pump Assy; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Power Steering Pump
Part Number: 26046792
Product Specifications
- Other Name: Pump Assembly-Power Steering; Power Steering Pump Assy; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Power Steering Pump
Part Number: 26045643
Product Specifications
- Other Name: Pump Assembly-Power Steering; Power Steering Pump Assy; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Power Steering Pump
Part Number: 26045642
Product Specifications
- Other Name: Pump Assembly-Power Steering; Power Steering Pump Assy; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Power Steering Pump
Part Number: 19369067
Product Specifications
- Other Name: Pump Kit, Power Steering
- Replaces: 26086070
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Power Steering Pump

Our website offers an extensive catalog of genuine Buick Park Avenue Power Steering Pump at unbeatable prices. Every OEM Buick Park Avenue Power Steering Pump comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Park Avenue Power Steering Pump Parts Questions & Experts Answers

Power Steering Pump
19369067
Q: How to replace the power steering pump on Buick Park Avenue?
A: Before starting the Power Steering Pump replacement you must remove the Drive Belt then safely hoist the vehicle. A drain pan should be installed underneath the vehicle after which you can disconnect the power steering pressure hose and return hose from the pump along with the wiring harness. You must eliminate the right outer tie rod retaining nut along with the antilock brake wiring harness bracket. First remove the Power Steering Pump retaining bolts then disconnect the right outer tie rod and the Power Steering Pump. You can use the steering linkage and tie rod puller (J 24319-B) to take out the outer tie rod from the Steering Knuckle. Move the power steering pulley if it becomes needed during removal. The Power Steering Pump installation should start with placing it onto the engine followed by bolt installation at 27 nm (20 ft. Lbs.) torque. After budging the wiring harness you must install the antilock brake wiring harness bracket. The right outer tie rod requires installation to the Steering Knuckle before torquing the outer tie rod retaining nut to 75 nm (55 ft. Lbs.). You should connect the power steering pressure hose followed by tight torque to 27 nm (20 ft. Lbs.). Complete the procedure by joining the power steering return hose. After lowering the vehicle users must install the Drive Belt then bleed the power steering system while conducting a leak inspection.

Related Buick Park Avenue Parts

Browse Buick Park Avenue Power Steering Pump by Years

2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991