How to replace the front brake line on Cadillac Escalade?

To replace the front brake hose, first clean the two ends where the hose fits to clear all dirt, grease and foreign material. Pull out the brake hose and then remove the clip, bolt, and washers, followed by the end of the steel pipe. When installing a new brake hose, make sure it is not twisted and does not contact any other components and use new copper washers at the time of installation. Really tighten the bolt then 44 Nm (32 ft. lbs.) and put the clip. Finally, link steel pipe and bleed brake to finalize the procedure.

How to Service and Repair Brake Lines Using the J 45405 Brake Line Flaring Kit on Cadillac Escalade?

Before brake pipe work you need J 45405 Brake Pipe Flaring Kit (J 45405) coupled with safety measures associated with brake fluids and double-walled steel pipes to prevent system failures. First view the brake pipe area you will replace and unfasten the retained parts there. Pick an ideal spot for sectioning the brake pipe and choosing a location that does not have bends or mounting points. Then measure and cut the section to replace keeping space for flares. Use 6.35 mm (0.250 in) for 4.76 mm (3/16 in) brake pipe and 9.50 mm (0.374 in) for 6.35 mm (1/4 in) brake pipe. Use the pipe cutter tool from J 45405 to cut the brake pipe to a straight edge and remove the cut section. Install the proper size tube nuts on brake pipe by first stripping the nylon coating from one end with the tool set J 45405 and flaring tool J 45405. Afterward continue preparing the end by using the prescriptive J 45405 tool to lighten both the internal and external surface. Cut the brake pipe squarely using the J 45405 tool set while installing tube nuts and cleaning all parts with proper preparation of the die assembly. Insert the clean prepared pipe end into the dies and tighten the clamping screw. Select the required forming mandrel to operate the J 45405 (J 45405) until the bottom reaches the dies. Check if the finished cone-shaped end measures 6.92 to 8.92 mm (+/- 0.18 mm) depending on the pipe size (4.76 mm or 6.35 mm). Use needed shape tools to form the new pipe and put everything together after installation with union fittings and retainers using the proper procedure. Then bleed the brake system from the reservoir and examine for leaks during engine run with applied brakes.

OEM Cadillac Escalade Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Brake Lines found

View related parts
Cadillac Escalade Flex Hose, Driver Side Part Number: 84331226
$39.06 MSRP: $76.46
You Save: $37.40 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 23210118, 84183669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Passenger Side Part Number: 84331228
$21.63 MSRP: $40.61
You Save: $18.98 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15875928, 84183672, 15923784, 22829661, 23245429, 22946996, 25890939
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Driver Side Part Number: 19366695
$41.40 MSRP: $77.27
You Save: $35.87 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaced by: 19435351
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Passenger Side Part Number: 19366696
$39.94 MSRP: $77.50
You Save: $37.56 (49%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaced by: 19435352
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Flex Hose, Rear Part Number: 19366659
$45.81 MSRP: $89.68
You Save: $43.87 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15772883
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Passenger Side Part Number: 84956405
$30.27 MSRP: $54.07
You Save: $23.80 (45%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Driver Side Part Number: 84956401
$22.65 MSRP: $40.46
You Save: $17.81 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 84456359, 84956397, 84612460, 84829327, 84637394, 84613959
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Passenger Side Part Number: 85542391
$42.38 MSRP: $75.68
You Save: $33.30 (44%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Brake Hose
- Position: Passenger Side
- Replaced by: 85629611
- Replaces: 84807862, 84956406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Driver Side Part Number: 85542392
$71.27 MSRP: $127.27
You Save: $56.00 (44%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Brake Hose
- Position: Driver Side
- Replaced by: 86568703
- Replaces: 84807863, 84956407
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Passenger Side Part Number: 84956403
$29.40 MSRP: $55.22
You Save: $25.82 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 84956398, 84612461, 23363941, 84637393
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Passenger Side Part Number: 84331225
$34.06 MSRP: $63.97
You Save: $29.91 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 22825050, 84183668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Driver Side Part Number: 84956404
$32.45 MSRP: $57.93
You Save: $25.48 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Driver Side Part Number: 84331227
$21.20 MSRP: $39.81
You Save: $18.61 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15923783, 22946995, 22829660, 23245428, 25890938, 15875927, 84183671
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Flex Hose, Passenger Side Part Number: 25906096
$70.44 MSRP: $137.91
You Save: $67.47 (49%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 25801594, 25890942
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 6.0L V8, 6.2L V8, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Brake Hose, Front Driver Side Part Number: 19366730
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 22113467, 22163599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Flex Hose, Rear Part Number: 19366771
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 22113465, 94665587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Passenger Side Part Number: 19150637
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Brake Hose, Passenger Side Part Number: 22163392
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Line
- Position: Passenger Side
- Replaces: 22113468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Flex Hose, Front Passenger Side Part Number: 19366665
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 17999994, 22113462
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Brake Hose, Front Driver Side Part Number: 19366664
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 22163425, 17999993
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Cadillac Escalade Brake Line

Want to cut long-term maintenance and repair costs? Choose OEM Brake Line. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade Brake Line includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Cadillac Escalade Brake Line is an important part that transmits the brake fluid from the master cylinder to the brake caliper pistons required for proper working of the hydraulic brakes. Working with a metal brake line consists of experiencing complications of corrosion and impact which then causes leakage of the fluid and loss of pressure. Brake hoses can also get physical and internal wear and tear issues that in a way batter the brakes. When replacement is necessary, pre-bent brake line kits and corrosion resistant stainless steel hoses are used for fixing. Switching from the rubber hockey-puck style hoses to braided stainless steel hoses can give a considerable increase in the direct feel and communication between the driver and the car, particularly under high load or spirited driving conditions.

Cadillac Escalade Brake Line Parts and Q&A

Brake Hose, Front Driver Side
19366730
Q: How to replace the front brake line on Cadillac Escalade?
A:
To replace the front brake hose, first clean the two ends where the hose fits to clear all dirt, grease and foreign material. Pull out the brake hose and then remove the clip, bolt, and washers, followed by the end of the steel pipe. When installing a new brake hose, make sure it is not twisted and does not contact any other components and use new copper washers at the time of installation. Really tighten the bolt then 44 Nm (32 ft. lbs.) and put the clip. Finally, link steel pipe and bleed brake to finalize the procedure.
Flex Hose, Front Driver Side
19366683
Q: How to Service and Repair Brake Lines Using the J 45405 Brake Line Flaring Kit on Cadillac Escalade?
A:
Before brake pipe work you need J 45405 Brake Pipe Flaring Kit (J 45405) coupled with safety measures associated with brake fluids and double-walled steel pipes to prevent system failures. First view the brake pipe area you will replace and unfasten the retained parts there. Pick an ideal spot for sectioning the brake pipe and choosing a location that does not have bends or mounting points. Then measure and cut the section to replace keeping space for flares. Use 6.35 mm (0.250 in) for 4.76 mm (3/16 in) brake pipe and 9.50 mm (0.374 in) for 6.35 mm (1/4 in) brake pipe. Use the pipe cutter tool from J 45405 to cut the brake pipe to a straight edge and remove the cut section. Install the proper size tube nuts on brake pipe by first stripping the nylon coating from one end with the tool set J 45405 and flaring tool J 45405. Afterward continue preparing the end by using the prescriptive J 45405 tool to lighten both the internal and external surface. Cut the brake pipe squarely using the J 45405 tool set while installing tube nuts and cleaning all parts with proper preparation of the die assembly. Insert the clean prepared pipe end into the dies and tighten the clamping screw. Select the required forming mandrel to operate the J 45405 (J 45405) until the bottom reaches the dies. Check if the finished cone-shaped end measures 6.92 to 8.92 mm (+/- 0.18 mm) depending on the pipe size (4.76 mm or 6.35 mm). Use needed shape tools to form the new pipe and put everything together after installation with union fittings and retainers using the proper procedure. Then bleed the brake system from the reservoir and examine for leaks during engine run with applied brakes.