Q: How to replace the Steering Column Seal on the intermediate shaft on Cadillac CTS?
A: First standing procedure is to follow sir safety protocols before replacing the intermediate Steering Shaft seal. The Steering Column removal process requires intact attachment of the upper intermediate shaft. Set the intermediate shaft seal onto the mod plate while checking that it forms a perfect seal against the mod plate. Following installation of the steerable seal, attach the Steering Column while enabling the sir system.
Q: How to replace the Steering Column Seal on the intermediate shaft on Cadillac SRX?
A: Service teams need to follow the sir caution in service precautions before performing intermediate Steering Shaft seal replacement. The upper intermediate shaft remains attached as the Steering Column gets extracted. Next remove the Steering Column then extract the intermediate shaft seal from the mod plate. Install the new intermediate shaft seal onto the mod plate so it forms an adequate seal between the intermediate shaft seal and the mod plate. Reinstall the Steering Column and refer to the sir disabling and enabling zone 3 in air bags and seat belts for system activation instructions.
Q: How to replace the Steering Column Seal on the intermediate steering shaft while ensuring safety on Cadillac STS?
A: To replace the seal of the intermediate steering we first need to observe all the safety precautions associated with restraint systems. The Steering Column must be removed attached with the upper intermediate shaft still attached to it. When taken out the steering adjust the Steering Column, then remove the intermediate shaft seal in the mod plate. For installation, fit the new intermediate shaft seal onto the mod plate such that an adequate seal is obtained between the intermediate shaft seal with mod plate. Reinstall the Steering Column and then allow the sir system according to the sir disabling and enabling zone 3 in restraint systems.