How to replace the Power Steering Hose on Chevrolet Classic?

The first step to replace power steering pressure hoses begins by using a hoist to lift the vehicle and extracting the front Exhaust Pipe with Catalytic Converter if the car has an automatic transmission. A mechanic should detach the power steering pressure hose from the power steering gear followed by lowering the vehicle. Suspension the upper air cleaner assembly and detach the power steering pressure hose from the power steering pump pipe before removing it from the vehicle. Install the power steering pressure hose following technique guidelines where the hose needs to be straight and attach it properly to the vehicle. Set the power steering pressure hose into the power steering pump pipe before tightening the connection with 27 nm (20 ft. Lbs.). Place the upper air cleaner assembly after which the vehicle should be raised again before replacing the front Exhaust Pipe with its Catalytic Converter if removed. Complete the connection of power steering pressure hose with power steering gear by proper tightening to 27 nm (20 ft. Lbs.). Then lower the vehicle before bleeding the power steering system.

OEM Chevrolet Classic Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Power Steering Hoses found

View related parts
Chevrolet Classic Power Steering Return Hose
Part Number: 26065890
$39.70 MSRP: $64.98
You Save: $25.28 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose, Power Steering Gear Outlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Classic Power Steering Pressure Hose
Part Number: 22685424
$98.91 MSRP: $161.89
You Save: $62.98 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Classic Inlet Pipe
Part Number: 19303603
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure; Power Steering Hose; Reservoir Hose; Pressure Tube; Upper Return Tube; Pipe, Steering Gear Oil Return
- Replaces: 22679182, 22694889
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Classic Line Kit, Passenger Side
Part Number: 26053451
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Classic Line Kit, Driver Side
Part Number: 26053450
Product Specifications
- Other Name: Pipe, Steering Gear Oil Pressure
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS

Chevrolet Classic Power Steering Hose

Our website offers an extensive catalog of genuine Chevrolet Classic Power Steering Hose at unbeatable prices. Every OEM Chevrolet Classic Power Steering Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Classic Power Steering Hose Parts Questions & Experts Answers

Inlet Pipe
19303603
Q: How to replace the Power Steering Hose on Chevrolet Classic?
A: The first step to replace power steering pressure hoses begins by using a hoist to lift the vehicle and extracting the front Exhaust Pipe with Catalytic Converter if the car has an automatic transmission. A mechanic should detach the power steering pressure hose from the power steering gear followed by lowering the vehicle. Suspension the upper air cleaner assembly and detach the power steering pressure hose from the power steering pump pipe before removing it from the vehicle. Install the power steering pressure hose following technique guidelines where the hose needs to be straight and attach it properly to the vehicle. Set the power steering pressure hose into the power steering pump pipe before tightening the connection with 27 nm (20 ft. Lbs.). Place the upper air cleaner assembly after which the vehicle should be raised again before replacing the front Exhaust Pipe with its Catalytic Converter if removed. Complete the connection of power steering pressure hose with power steering gear by proper tightening to 27 nm (20 ft. Lbs.). Then lower the vehicle before bleeding the power steering system.