How to replace the MAP Sensor on Chevrolet Impala?

Start by removing the intake manifold cover before replacing the Manifold Absolute Pressure Sensor. Remove the spark plug wire clip from the intake manifold bracket. Then disconnect the electrical connector of the manifold absolute pressure (MAP) sensor. Starting with bolt removal from the upper intake manifold you should proceed to take out the MAP sensor with its bracket before extracting the MAP sensor seal from this component. Another part of the installation process involves inserting the MAP sensor seal into the upper intake manifold before installing both the MAP sensor and its bracket. Secure the upper intake manifold bolts where torque reaches 25 Nm (18 lb ft) while optional spark plug wire clip reattachment to the intake manifold bracket might be necessary. oku to complete the installation by connecting the MAP sensor electrical connections before fitting in the intake manifold cover.

OEM Chevrolet Impala MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 MAP Sensors found

View related parts
Chevrolet Impala M.A.P. Sensor
Part Number: 55573248
$30.16 MSRP: $56.65
You Save: $26.49 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2020 Chevrolet Impala | 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala M.A.P. Sensor, Green, Passenger Side
Part Number: 12569240
$64.92 MSRP: $126.03
You Save: $61.11 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor; Pressure Sensor; Manifold Pressure Sensor; Emission Control Sensors (Vehicle Speed, Oxygen)
- Position: Passenger Side
- Replaces: 16254719, 16137039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004, 1994-1996, 1985 Chevrolet Impala | Base, SS | 6 Cyl 3.4 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Barometric Sensor
Part Number: 16006833
$81.66 MSRP: $158.48
You Save: $76.82 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor
- Replaced by: 12219931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala M.A.P. Sensor
Part Number: 19418810
$70.30 MSRP: $142.80
You Save: $72.50 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Pressure Sensor; Boost Solenoid; Barometric Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 09350899, 12580698, 12615136, 9350899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Impala | Base, LS, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala M.A.P. Sensor
Part Number: 12615135
$50.45 MSRP: $157.51
You Save: $107.06 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Pressure Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12581167
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Impala | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Impala M.A.P. Sensor
Part Number: 12569241
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Pressure Sensor; Boost Sensor; Turbo Sensor
- Replaces: 16009886, 16040609, 16254539
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Chevrolet Impala | Base, LS, SS | 6 Cyl 3.8 L GAS

Chevrolet Impala MAP Sensor

Our website offers an extensive catalog of genuine Chevrolet Impala MAP Sensor at unbeatable prices. Every OEM Chevrolet Impala MAP Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala MAP Sensor Parts Questions & Experts Answers

M.A.P. Sensor
55573248
Q: How to replace the MAP Sensor on Chevrolet Impala?
A: Start by removing the intake manifold cover before replacing the Manifold Absolute Pressure Sensor. Remove the spark plug wire clip from the intake manifold bracket. Then disconnect the electrical connector of the manifold absolute pressure (MAP) sensor. Starting with bolt removal from the upper intake manifold you should proceed to take out the MAP sensor with its bracket before extracting the MAP sensor seal from this component. Another part of the installation process involves inserting the MAP sensor seal into the upper intake manifold before installing both the MAP sensor and its bracket. Secure the upper intake manifold bolts where torque reaches 25 Nm (18 lb ft) while optional spark plug wire clip reattachment to the intake manifold bracket might be necessary. oku to complete the installation by connecting the MAP sensor electrical connections before fitting in the intake manifold cover.