How to install the A/C Accumulator (ACDelco P/N 151696) on Chevrolet Monte Carlo?

Start the installation of the A/C Accumulator (ACDelco P/N 151696) by recovering any refrigerant. Cut the evaporator tube 110 mm (4.3 in) from the condenser block fitting end by using a tubing cutter and avoid letting any metal shavings enter the tube. Cut the tube to 60 mm (2.4 in) after measuring it and remove burrs from both cut ends. The first step before ferrule installation on the evaporator tube requires removal of the o-ring which will be used with the A/C Accumulator. Install the taper-end of both ferrules along with one flare nut on the evaporator tube before seating the A/C Accumulator fully on the tube by making the arrow face the evaporator. Tighten the evaporator flare nut to 15 n.m (11 lb ft) torque. Follow the same tightening process for the second half of the evaporator tube by using a torque of 15 n.m (11 lb ft). First loosen the flare nuts so you can remove the A/C Accumulator before lubricating and installing an o-ring to both ends of the evaporator tube to ensure complete accumulator seat to the ferrules. The A/C Accumulator should be installed back in place with the arrow facing the evaporator and its flare nuts tightened to 15 n.m (11 lb ft). Finish the process by installing the evaporator tube to the condenser tube followed by reassembly of the air cleaner unit then evacuation and recharging of the a/c system and conducting halogen leak detector (J 39400-A) tests on the fittings.

OEM Chevrolet Monte Carlo A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 A/C Accumulators found

View related parts
Chevrolet Monte Carlo Dehydrator
Part Number: 1132766
$24.58 MSRP: $46.16
You Save: $21.58 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly, A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Dehydrator
Part Number: 2724804
$21.36 MSRP: $45.96
You Save: $24.60 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Dehydrator Access; A/C Receiver Drier; A/C Accumulator; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base, SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Dehydrator
Part Number: 2724929
$14.31 MSRP: $50.00
You Save: $35.69 (72%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Dehydrator
Part Number: 2724683
$27.78 MSRP: $50.28
You Save: $22.50 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator, A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Monte Carlo Drier
Part Number: 2724240
Product Specifications
- Other Name: Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base, SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Dehydrator
Part Number: 1132767
Product Specifications
- Other Name: Accumulator; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Dehydrator
Part Number: 10333862
Product Specifications
- Other Name: Receiver & Dehydrato, Air Conditioner Refrigerant; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator; Receiver & Dehydrato, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo A/C Accumulator

Our website offers an extensive catalog of genuine Chevrolet Monte Carlo A/C Accumulator at unbeatable prices. Every OEM Chevrolet Monte Carlo A/C Accumulator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Monte Carlo A/C Accumulator Parts Questions & Experts Answers

Dehydrator
1132766
Q: How to install the A/C Accumulator (ACDelco P/N 151696) on Chevrolet Monte Carlo?
A: Start the installation of the A/C Accumulator (ACDelco P/N 151696) by recovering any refrigerant. Cut the evaporator tube 110 mm (4.3 in) from the condenser block fitting end by using a tubing cutter and avoid letting any metal shavings enter the tube. Cut the tube to 60 mm (2.4 in) after measuring it and remove burrs from both cut ends. The first step before ferrule installation on the evaporator tube requires removal of the o-ring which will be used with the A/C Accumulator. Install the taper-end of both ferrules along with one flare nut on the evaporator tube before seating the A/C Accumulator fully on the tube by making the arrow face the evaporator. Tighten the evaporator flare nut to 15 n.m (11 lb ft) torque. Follow the same tightening process for the second half of the evaporator tube by using a torque of 15 n.m (11 lb ft). First loosen the flare nuts so you can remove the A/C Accumulator before lubricating and installing an o-ring to both ends of the evaporator tube to ensure complete accumulator seat to the ferrules. The A/C Accumulator should be installed back in place with the arrow facing the evaporator and its flare nuts tightened to 15 n.m (11 lb ft). Finish the process by installing the evaporator tube to the condenser tube followed by reassembly of the air cleaner unit then evacuation and recharging of the a/c system and conducting halogen leak detector (J 39400-A) tests on the fittings.