Other Name: Strut Assembly-Rear Compartment Lift Window; Trunk Lid Lift Support; Liftgate Tailgate Support.; Support Cylinder; Strut, Rear Compartment Lid Or Tail Gate Counter Balance
Position: Rear Passenger Side
Replaces: 10284059, 10251722
Fits the following Chevrolet Models:
Camaro | 1993-2002 | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
Other Name: Strut Assembly-Rear Compartment Lift Window; Trunk Lid Lift Support; Liftgate Tailgate Support.; Support Cylinder; Strut, Rear Compartment Lid Or Tail Gate Counter Balance
Position: Rear Driver Side
Replaces: 10251723
Fits the following Chevrolet Models:
Camaro | 1993-2002 | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Strut
Position: Rear
Fits the following Chevrolet Models:
Monte Carlo | 2000-2005 | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Q: How to replace the rear Trunk Lid Lift Support on Chevrolet Cobalt?
A: Begin work on the rear compartment lid strut by supporting and opening the lid first to keep yourself safe. Insert a small flat tool to free the two clips that lock the handle rod to lower and upper ball studs. Pull out the rear compartment lid assist rod from the car. Install the rear compartment lid assist rod first by pressing it onto the upper ball stud and then by fitting it to the lower ball stud. Make sure you push both clips along their entire space on the rear compartment support rod prior to locking the box.
Q: How to replace the rear trunk lid lift support on a convertible on Chevrolet Camaro?
A: To change the rear compartment lift window linkage requires you to first lift the convertible rear trunk while stabilizing it. Using a flat-blade screwdriver with care you can detach the strut from its mounts without putting the part at risk. First pull the rear lift panel strut both from the rear trunk lid and rear body mounts before bringing it out of the car. Fasten the strut by applying significant force until it snaps into position on the mounts and test its stability by tugging at the strut. Reinsert the strut to its seats on both the rear tub and the rear mounting points of the body. Then remove the holding tool and shut the trunk lid.
Q: How to replace the rear Trunk Lid Lift Support on Chevrolet Impala?
A: To replace the rear compartment lid strut, it is first necessary to open and support the rear compartment lid in order to prevent damage or personal injury. Using a small flat-bladed tool, release the clip retaining the rear compartment lid assist rod to the lower assist rod ball stud, then release the clip retaining the assist rod to the upper assist rod ball stud. Do away with the back compartment lid assist tube from the car. For installation, press rear compartment lid assist the rod on the upper rear compartment lid assist rod ball stud, followed by pressing the rod onto the lower assist rod ball stud. Make sure that two clips are properly placed on the rear compartment assist rod before closing it.