How to replace the Dipstick Tube on GMC Acadia?

The first step before replacing the oil level indicator and tube is to turn off the ignition. Start by removing both the oil level indicator from its tube before you extract the bolt holding the tube along with pulling the complete tube upwards through the Exhaust Manifold. The procedure calls for discarding the seal only when replacing the oil level indicator tube seal alone. The next step is to place a new seal on the oil level indicator tube before tube reinstallation. The installation of the oil level indicator tube bolt needs a 10 n.m (89 lb in) torque setting. Reinstall the oil level indicator at the end of the oil level indicator tube.

How to replace the Dipstick Tube and oil level indicator on GMC Canyon?

You should begin by taking off the fuel line clip that secures the oil level indicator bracket while drawing out the oil level indicator from its tube. The first step requires you to remove the bolt that secures the oil level indicator tube and entirely extract the tube from the engine Oil Pan. Start by applying slight engine oil to the o-ring seal before installing the oil level indicator tube into the engine Oil Pan according to the fastener notice guidelines. Use the required torque of 10 n.m (89 lb in) to fasten the oil level indicator tube bolt. Secure the fuel line clip to the oil level indicator bracket while finishing up installation of the tube with its indicator.

How to replace the Dipstick Tube on GMC Sierra 1500?

First remove the oil level indicator and the oil level indicator tube bolt before extracting the oil level indicator tube from the engine block while examining the o-ring seal for any damage because a reusable o-ring seal requires no replacement if it remains intact. The o-ring seal should be taken out from the tube if required. Clean engine oil serves to lubricate the o-ring seal when you put in a new o-ring seal onto the oil level indicator tube for installation. Place the oil level indicator tube between the Exhaust Manifold and engine block after raising and properly supporting the car. After positioning the oil level indicator tube into the block with collar facing the surface, lower the vehicle into its normal position. Seal the oil level indicator tube with the bolt by tightening it to 25 nm (18 ft. Lbs.). Place the oil level indicator afterward.

OEM GMC Dipstick Tube

Oil Dipstick Tube

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

58 Dipstick Tubes found

View related parts
GMC Oil Tube
Part Number: 12590590
$34.88 MSRP: $57.46
You Save: $22.58 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Oil Level Indicator; Oil Dipstick Tube; Tube; Tube, Engine Oil Level
- Replaces: 12571712
Fits the following GMC Models:
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Oil Tube
Part Number: 12603193
$42.81 MSRP: $67.06
You Save: $24.25 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Savana 1500 | 2004-2007 | Base, LS, LT, SLE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Savana 2500 | 2004-2007 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Savana 3500 | 2004-2007 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Dipstick Tube
Part Number: 12609756
$16.78 MSRP: $27.65
You Save: $10.87 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Engine Oil Level; Oil Dipstick Tube; Oil Tube
Fits the following GMC Models:
- Savana 1500 | 2008-2014 | Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Savana 2500 | 2008-2020 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Savana 3500 | 2008-2020 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Oil Tube
Part Number: 12570590
$30.33 MSRP: $49.98
You Save: $19.65 (40%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
- Replaces: 12565644
Fits the following GMC Models:
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2001-2006 | SLE, SLT | 8 Cyl 8.1 L GAS
View More
View related parts
GMC Dipstick Tube
Part Number: 12684848
$36.88 MSRP: $57.78
You Save: $20.90 (37%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Oil Dipstick Tube; Oil Tube; Tube, Engine Oil Level
Fits the following GMC Models:
- Savana 2500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
- Savana 3500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
View related parts
GMC Tube
Part Number: 12567172
$55.74 MSRP: $87.31
You Save: $31.57 (37%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Envoy | 2005-2009 | Denali | 8 Cyl 5.3 L GAS
- Envoy XL | 2003-2006 | Denali, SLE, SLT | 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 8 Cyl 5.3 L GAS
View More
View related parts
GMC Guide Tube
Part Number: 12651581
$14.74 MSRP: $23.11
You Save: $8.37 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Engine Oil Level; Oil Dipstick Tube
Fits the following GMC Models:
- Acadia | 2013-2016 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
- Acadia Limited | 2017 | Base | 6 Cyl 3.6 L GAS
View related parts
GMC Oil Tube
Part Number: 97374364
$131.41 MSRP: $206.77
You Save: $75.36 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Sierra 2500 HD | 2006-2007 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2006 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007 | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Oil Tube
Part Number: 12676952
$94.07 MSRP: $147.35
You Save: $53.28 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Sierra 2500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Oil Tube
Part Number: 12659416
$27.50 MSRP: $45.32
You Save: $17.82 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Sierra 1500 | 2014-2018 | Base, Denali, SLE, SLT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Oil Tube
Part Number: 12625480
$21.57 MSRP: $33.78
You Save: $12.21 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Oil Level Indicator; Oil Dipstick Tube; Guide Tube; Tube, Engine Oil Level
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
GMC Oil Tube
Part Number: 12574388
$54.66 MSRP: $85.63
You Save: $30.97 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Savana 1500 | 2003 | Base, SLE | 8 Cyl 5.3 L GAS
- Savana 2500 | 2003 | Base, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Savana 3500 | 2003 | Base, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Dipstick Tube
Part Number: 12722255
$8.05 MSRP: $12.62
You Save: $4.57 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Oil Tube; Tube, Engine Oil Level
- Replaced by: 12734060
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Pro, SLE, SLT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Yukon | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Dipstick Tube
Part Number: 12711326
$8.53 MSRP: $13.37
You Save: $4.84 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Oil Dipstick Tube; Oil Tube; Tube Assembly; Tube, Engine Oil Level
- Replaces: 12663777
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Sierra 1500 | 2019-2023 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View related parts
GMC Oil Tube
Part Number: 12634511
$72.69 MSRP: $113.86
You Save: $41.17 (37%)
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Sierra 2500 HD | 2011-2016 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2011-2016 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Oil Level Sensor
Part Number: 12672635
$26.66 MSRP: $41.76
You Save: $15.10 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Oil Dipstick Tube; Oil Tube; Tube, Engine Oil Level
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Oil Tube
Part Number: 40009232
$9.69 MSRP: $15.18
You Save: $5.49 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Oil Level Indicator; Tube, Engine Oil Level
- Replaces: 55508302, 55511555, 24000240
Fits the following GMC Models:
- Sierra 1500 | 2020-2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Oil Tube
Part Number: 12678814
$29.14 MSRP: $48.00
You Save: $18.86 (40%)
ADD TO CART
Product Specifications
- Other Name: Tube, Engine Oil Level
- Position: Lower
Fits the following GMC Models:
- Savana 2500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
- Savana 3500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
View related parts
GMC Oil Tube
Part Number: 12677710
$21.45 MSRP: $33.59
You Save: $12.14 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Oil Tube
Part Number: 97365698
$42.08 MSRP: $65.91
You Save: $23.83 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Tube, Engine Oil Level
Fits the following GMC Models:
- Savana 2500 | 2006-2009 | Base | 8 Cyl 6.6 L DIESEL
- Savana 3500 | 2006-2009 | Base | 8 Cyl 6.6 L DIESEL

| Page 1 of 3 |Next >

1-20 of 58 Results

GMC Dipstick Tube Parts Questions & Experts Answers

Oil Tube
12593211
Q: How to replace the Dipstick Tube on GMC Acadia?
A: The first step before replacing the oil level indicator and tube is to turn off the ignition. Start by removing both the oil level indicator from its tube before you extract the bolt holding the tube along with pulling the complete tube upwards through the Exhaust Manifold. The procedure calls for discarding the seal only when replacing the oil level indicator tube seal alone. The next step is to place a new seal on the oil level indicator tube before tube reinstallation. The installation of the oil level indicator tube bolt needs a 10 n.m (89 lb in) torque setting. Reinstall the oil level indicator at the end of the oil level indicator tube.
Oil Tube
12590590
Q: How to replace the Dipstick Tube and oil level indicator on GMC Canyon?
A: You should begin by taking off the fuel line clip that secures the oil level indicator bracket while drawing out the oil level indicator from its tube. The first step requires you to remove the bolt that secures the oil level indicator tube and entirely extract the tube from the engine Oil Pan. Start by applying slight engine oil to the o-ring seal before installing the oil level indicator tube into the engine Oil Pan according to the fastener notice guidelines. Use the required torque of 10 n.m (89 lb in) to fasten the oil level indicator tube bolt. Secure the fuel line clip to the oil level indicator bracket while finishing up installation of the tube with its indicator.
Oil Tube
12561672
Q: How to replace the Dipstick Tube on GMC Sierra 1500?
A: First remove the oil level indicator and the oil level indicator tube bolt before extracting the oil level indicator tube from the engine block while examining the o-ring seal for any damage because a reusable o-ring seal requires no replacement if it remains intact. The o-ring seal should be taken out from the tube if required. Clean engine oil serves to lubricate the o-ring seal when you put in a new o-ring seal onto the oil level indicator tube for installation. Place the oil level indicator tube between the Exhaust Manifold and engine block after raising and properly supporting the car. After positioning the oil level indicator tube into the block with collar facing the surface, lower the vehicle into its normal position. Seal the oil level indicator tube with the bolt by tightening it to 25 nm (18 ft. Lbs.). Place the oil level indicator afterward.