C1500 | 1988-1999, 1985-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
C1500 Suburban | 1992-1998 | Base, SLE, SLT | 8 Cyl 5.7 L GAS
C2500 | 1988-2000, 1985-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
C2500 Suburban | 1992-1998 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
C3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS
Caballero | 1984-1987 | Amarillo, Base, Diablo | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS
G1500 | 1984-1995 | Rally, Rally STX, Vandura | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS
G2500 | 1984-1995 | Rally, Rally STX, Vandura | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS
G3500 | 1984-1996 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS
Jimmy | 1992-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
Acadia | 2007-2011 | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
Canyon | 2009-2012, 2004-2006 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 5 Cyl 3.5 L GAS, 8 Cyl 5.3 L GAS
Envoy | 2007-2009 | Denali | 8 Cyl 5.3 L GAS
Savana 1500 | 2007-2014 | Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
Savana 2500 | 2007-2020 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Savana 3500 | 2007-2020 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
Sierra 2500 HD | 2007-2019 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Q: How to replace the engine oil and oil filter on GMC Canyon?
A: You should start the procedure by taking off the oil fill cap while securely positioning the vehicle. First wipe away all traces of dirt from around the Drain Plug of the Oil Pan then set a proper drain pan beneath it. Begin by removing the Oil Pan Drain Plug and letting the entire oil drain out before cleaning the plug. Replace the Drain Plug if necessary and check the sealing surface for cleanliness before deciding whether to switch to a new Oil Pan. Clean the Drain Plug opening and properly tighten the Drain Plug until it reaches a secure position. Insert a container beneath the engine Oil Filter drain deflector and place a drain pan under the Oil Filter before removing it. Check if the Oil Filter gasket remains with the old filter. The adapter gasket should be discarded if it cannot be found on the filter. Add new engine oil to the new Oil Filter gasket before you install the new Oil Filter. Tighten the filter to 10 nm (89 lb in) and continue tightening for an additional 150 degrees. Dry the Oil Filter drain deflector before applying force of 26 nm (19 lb ft) to tighten the Oil Pan Drain Plug while removing the drain pan placed under the vehicle. Add new engine oil according to fluid and lubricant specifications along with approximate capacities while working with the lowered vehicle. Turn on the engine to check for leaks before shutting it off again to allow oil to flow back into the pan during a few minutes. First clean the end of the tube using a paper towel before reinstalling the oil level indicator so that it reaches the top edge of the tube. For checking oil level remove the indicator twice while maintaining tip position down. Perform necessary adjustments by adding or draining oil. Follow up the procedure by confirming the engine has leaks then fasten the oil fill cap.
Q: How to replace the engine oil and oil filter on GMC Envoy?
A: You need to start by disconnecting the oil fill cap while raising the vehicle before changing your engine oil and filter. Remove the oil Drain Plug from the oil pan through a proper container while verifying the old Oil Filter seal doesn't stick to the engine block. Use proper wrenches to remove the Oil Filter before cleaning away leftover oil residue from the device housing. Apply clean engine oil to the new Oil Filter's seal before installation while tightening it to 17 nm (22 ft. Lbs.) plus 150°. Reinstall the oil pan Drain Plug with 26 nm (19 ft. Lbs.) torque and lower the vehicle to completion. When adding appropriate engine oil to the crankcase remove the oil level indicator then wipe it clean before reinstallation. After removing the indication cap, perform a final oil check and add oil if necessary along with a leak inspection.
Q: How to Properly Change the Oil Filter on GMC Sierra 1500?
A: The first step for replacing engine oil and filter requires lifting the vehicle with proper support. Start by removing the Drain Plug to collect engine oil in a suitable container before checking the engine Oil Filter for a gasket removal. Insert a clean engine oil layer onto the filter gasket before putting on the Oil Filter which needs tightening at 30 n.m (22 lb ft). Install the Drain Plug after screwing it to 25 n.m torque (18 lb ft torque). First lower the vehicle while filling the engine compartment with oil at its correct quantity and quality. The next step entails starting the engine to check for oil leakage alongside measuring the pressure.