To remove the throttle assembly body, first, also disconnect the negative cable from the battery then remove engine cover, cruise control cable, air cleaner outlet duct, accelerator cable, and mounting bracket for the cables. Next, take off the idle air control (IAC) valve harness connector, throttle position (TP) sensor harness connector, air cleaner adaptor stud and Throttle Body fasteners and remove the Throttle Body assembly and discard the flange seal. Clean the surface of the seal in the
Intake Manifold and install new flange seal with Throttle Body assembly. Titan the Throttle Body assembly retaining fasteners to 25 n.m (18 lb ft) and the air cleaner adapt stud to 8 n.m (71 lb in). Then reconnect the tp sensor and iac valve harness connectors, and reinstall the accelerator and cruise control cables with the mounting bracket and ensure a proper routing to avoid the throttle plate from being left open. Lastly, install the accelerator cable, cruise control cable, air cleaner outlet duct, and engine cover before re-connecting the negative
Battery Cable. Try the accelerator pedal for free movement at the closed and full throttle by pressing and releasing it.