Other Name: Rod Assembly, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
Position: Outer
Replaced by: 85819772
Fits the following GMC Models:
Savana 1500 | 2003-2014 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
Savana 2500 | 2003-2024 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Savana 3500 | 2003-2024 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Sierra 1500 | 2001-2010 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
Sierra 2500 HD | 2001-2010 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Other Name: Rod Assembly, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; End, Steering Tie Rod Outer; Rod, Steering Tie Rod Outer
Position: Outer
Replaces: 00378343, 378343
Fits the following GMC Models:
C1500 | 1988, 1984-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra SLE, Sierra SLX | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
C1500 Suburban | 1984-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
C2500 | 1988, 1984-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra SLE, Sierra SLX | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
C2500 Suburban | 1984-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1988, 1984-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra SLE, Sierra SLX | 6 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
Jimmy | 1984 | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
K1500 | 1984-1986 | Base, High Sierra, Sierra Classic | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
K1500 Suburban | 1985-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
K2500 | 1984-1986 | Base, High Sierra, Sierra Classic | 6 Cyl 4.3 L GAS, 6 Cyl 4.8 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
K2500 Suburban | 1984-1986 | Base, High Sierra, Sierra Classic | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
Position: Outer
Fits the following GMC Models:
C1500 | 1988-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
C2500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1988-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
K1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
K2500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
Position: Outer
Fits the following GMC Models:
S15 | 1984-1990 | Base, EL, Gypsy, High Sierra, Sierra Classic | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
S15 Jimmy | 1984-1991 | Base, Gypsy, High Sierra, Sierra Classic, SLE, SLS, SLT, Timberline | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
Sonoma | 1991 | Base, SLE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
Q: How to replace the outer tie rod end on GMC Envoy?
A: The first step to replace an outer Tie Rod End requires vehicle elevation and wheel removal. Begin by taking off the outer tie rod retaining nut but keep the steering linkage joint attached by putting a wedge between the joint and its connected part to prevent seal damage. Disconnect the outer tie rod from the Steering Knuckle by using the steering linkage and tie rod puller (J24319-B). You should begin by loosening the jam nut then detach the outer tie rod from the inner tie rod by removing it while discarding the jam nut. Check the shaft for twisted or broken thread elements while wiping the tapered knuckle surface. Associate a suitable chassis lubricant to the inner tie rod threads before you connect the new jam nut to the outer tie rod and join the two components together. Follow the fastener notice when installing the outer tie rod on the Steering Knuckle and tighten the nut until it reaches 60 nm (44 ft. Lbs.). Complete the process by reinstalling the tire with wheel then lowering the vehicle before executing front toe adjustment.
Q: How to replace the Rack and Pinion Outer Tie Rod End on GMC Savana 2500?
A: The first thing that has to be done is to raise and then support the vehicle. Then take out the tire and the wheel, as well as the outer tie rod stud retaining nut. Remove the jam nut from the inner tie rod and remove the outer tie rod from the Steering Knuckle by using the steering linkage and tie rod puller (J 24319-B). Take off the outer tie rod from the inner tie rod. For installation, tie the outer tie rod to the inner tie rod leaving the jam nut loose, then tie the outer tie rod to the Steering Knuckle. Mount the outer tie rod nut and tighten it in 63 nm (47 ft. Lbs.). Make sure that the power steering gear boot is not twisted after the toe adjustment and align the wheel.
Q: How to replace the inner tie rod end of the rack and pinion on GMC Sierra 1500?
A: The first step to replace the inner tie rod of the Rack And Pinion begins with vehicle lifting followed by proper safety stand placement. Begin by taking off the tire together with the wheel then strip off the Rack and Pinion Boot. One must never adjust the rack bearing preload before separating the inner tie rod since this will lead to damage of the pinion or steering rack. Place the shock dampener onto the rack while you remove it from the inner tie rod. The j 34028 inner tie rod wrench (J 34028) should be used to apply a counterclockwise rotation on the flats of the inner tie rod housing to separate the inner tie rod from the rack assembly. Taboo all remnants of loctite® off the rack threads as well as within the inner tie rod. Clean all threads for loctite® application once the shock dampener sits on the rack and before beginning replacement of the new inner tie rod. Install the inner tie rod to the Rack And Pinion by applying loctite 262 or an equivalent product to the inner tie rod threads. The j 34028 torque wrench enables technicians to tighten the inner tie rod at 100 nm (74 ft. Lbs.) by holding the rack to prevent damage during this process. Fit the shock dampener onto the inner tie rod housing until it reaches the bottom position and proceed with boot installation before putting the wheel and tire in place. Stand safety through vehicle descent before performing wheel alignment inspection.