C1500 | 1993 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
C2500 | 1993 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1993 | Sierra, Sierra SLE, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1993 | Sierra, Sierra SLE, Sierra SLX, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
K2500 | 1993 | Sierra, Sierra SLE, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K3500 | 1993 | Sierra, Sierra SLE, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C1500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
C2500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
K2500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K3500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
| Page 1 of 2 |Next >
1-20 of 27 Results
GMC Transmission Oil Cooler Parts Questions & Experts Answers
Q: How to replace the Transmission Oil Cooler in a 4L80-E/4L85-E automatic transmission on GMC Savana 2500?
A: Start the repair process for a 4l80-e/4l85-e automatic transmission Transmission Oil Cooler by first removing the grille assembly. First disconnect the oil cooler lines then remove them from the push clips on the mounting bracket. Lift and stabilize your vehicle before removing all lower mounting bracket bolts from the oil cooler assembly. First lower the vehicle then choose the upper bolts off before extracting the oil cooler. Install the oil cooler into its position while you should tighten the upper bolts of the oil cooler bracket to a torque of 10 nm (89 lb in). Raise the vehicle to install the lower bolts onto the oil cooler bracket while tightening them to 10 nm (89 lb in). Connect the oil cooler lines to the oil cooler unit before attaching the lines to push clips in the mounting bracket while the vehicle remains in a lowered position. Finally, reinstall the grille assembly.
Q: How to replace the Transmission Oil Cooler on the 6L50/6L80/6L90 automatic transmission on GMC Yukon?
A: To replace the transmission fluid auxiliary cooler on the 6l50/6l80/6l90 automatic transmission, one must remove the front grill assembly. Put the drain pan under the vehicle and remove the Transmission Oil Cooler lines off the Transmission Oil Cooler. Next, you will need to remove the Transmission Oil Cooler bolts and push pins and remove Transmission Oil Cooler from vehicle. To install, position the new Transmission Oil Cooler, and bolt it and secure it with push pins on the radiator brace while tightening the screws to 12 nm (9 lb ft). Attach the Transmission Oil Cooler lines to Transmission Oil Cooler and finally put back the front grill assembly.
Q: How to replace the Transmission Oil Cooler for the 4L60-E/4L65-E on GMC Savana 3500?
A: For the 4l60-e/4l65-e, remove the grille assembly and place a drain pan under the lower part of the vehicle to replace the transmission fluid auxiliary cooler. Detach the Transmission Oil Cooler from the auxiliary Oil Cooler, and afterwards remove the Oil Cooler lines. The next step is to get rid of the 4 bolts and then take out the auxiliary Oil Cooler. Attach the Transmission Oil Cooler to the radiator support using the 4 bolts and ensure they are tightened to 10 nm (89 inch lbs.) also, remember to tighten the Oil Cooler lines to the auxiliary Oil Cooler so that they reach 23 nm (17 ft. Lbs.) after that, remove the drain pan and place back the grille assembly on your vehicle.