How to replace the front drive axle wheel seal or bearing on GMC Canyon?

The procedure to change front drive axle seals and bearings must start with removal of lower Control Arm swaybar links and wheel drive shafts. You should start by using tools from the j 29369-2 and j 2619-01 to separate the axle seal whereas tools from the same set remove the axle bearing. Afterward position the axle bearing into the intermediate housing before installing it with the j 23690 and j 8092 . The installation of the axle seal requires the j 21426 tool before reinstalling the wheel drive shaft and the swaybar link to the lower Control Arm. The maintenance ends with fluid level inspection and vehicle lower down.

How to Ensure Proper Installation of the Wheel Seal on GMC Sierra 1500?

Starting the replacement of front drive axle inner shaft seal and inner shaft bearing requires j 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). First elevate the vehicle and empty the differential carrier assembly of its fluid. You should extract the right side seal or bearing after removing the differential carrier case assembly and its internal axle shafts and housing units then unattaching the clutch fork assembly components and inner Axle Shaft from the inner Axle Shaft housing. Place the inner Axle Shaft housing into a vise before inserting the right bushing and bearing remover behind the seal or bearing (use either J 29369-1 or J 29369-2). Insert the slide hammer (J 2619-01) to the bushing and bearing remover when extracting the inner Axle Shaft seal or bearing. The process to replace left side seals begins by marking the alignment followed by wheel drive shaft disconnection and inner Axle Shaft and seal removal. Both replacement of the left side seal and bearing requires removal of the differential carrier assembly and attachment to a vise before performing the removal procedure again. The right side bearing and new Axle Shaft seal installation requires using the j 36609 axle tube bearing installer and j 8092 universal driver handle and j 45225 axle seal installer. Insert the inner Axle Shaft into position by careful tapping then rebuild all components along with the clutch fork before reattaching the differential carrier case assembly. Proceed with the left side installation when you removed its bearing and seal. The last installation step involves filling the differential carrier assembly with proper fluid before placing the vehicle back on the ground.

What tools are required to service and repair the wheel seal, wheel hub, bearing, and seal replacement for a 4WD on GMC Yukon?

A professional technician requires an axle remover item j 45859 to address the wheel-related mechanical issues of a 4wd car. For this task first lift the vehicle and then take off the tire wheel rotor in this sequence. Separate the Wheel Speed Sensor bolt from the knuckle and disconnect the brake hose bracket's bolt. Also remove the wheel drive shaft nut retaining cover. Installing the wheel drive shaft requires fresh nut replacement. Untighten the wheel drive shaft retaining nut along with its washer from the shaft using proper tools and disengage the Wheel Hub and bearing. Take out the Wheel Hub parts and then remove its mounting bolts for 15-series bearings before moving to 25/35 series Wheel Hub and bearing mounting bolts. Pull out all Wheel Hub parts and the splash shield as well as the o-ring seal from the steering knuckle bore on the 25/35 series vehicle. Check all damage in the o-ring seal when removing the Wheel Speed Sensor bolt. Replace the o-ring when needed. Clean and prepare both the steering knuckle bore and Wheel Hub and bearing assembly before applying wheel bearing grease or equivalent lubricant in the bore. Place the o-ring on the steering knuckle for 25/35 models before tightening the Wheel Speed Sensor bolt to 18 nm (13 ft lbs). Put both Wheel Hub and bearing units together with their splash shields onto the vehicle for 25/35 models and then put on Wheel Hub with bearing and splash shield for 15 series models. Fasten the Wheel Hub mounting bolts at 180 nm (133 ft.lbs) for the 15 series then put on the 25/35 series bolts and tighten Wheel Hub bolts to 180 nm (133 ft.lbs). Secure the wheel drive shaft with a washer and nut through the Wheel Hub then tighten the nut to 280 nm before fitting the Wheel Speed Sensor bracket to the steering knuckle. Proceed by placing the rotor tire and wheel on the vehicle and allow it to drop.

OEM GMC Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

71 Wheel Seals found

View related parts
GMC Oil Seal, Rear
Part Number: 12471686
$12.28 MSRP: $22.22
You Save: $9.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Hub Seal; Bearing Seal; Axle Seals; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15522060, 26037309
Fits the following GMC Models:
- C1500 | 1988-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1991-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1991-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- Canyon | 2004-2012 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
- Envoy | 2002-2009 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XL | 2002-2006 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- K1500 | 1988-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Axle Seals, Rear
Part Number: 26011061
$8.88 MSRP: $15.86
You Save: $6.98 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Wheel Bearing; Wheel Seal; Axle Seal; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- Safari | 1990-2002 | Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Axle Seal, Rear
Part Number: 26029139
$11.77 MSRP: $22.09
You Save: $10.32 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Wheel Bearing; Wheel Seal; Bearing Seal; Axle Seals; Wheel Bearing Seal; Seal, Rear Axle Shaft Bearing Or Hub; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- Jimmy | 1992-2001 | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
- Sonoma | 1995-2002 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
- Typhoon | 1992-1993 | Base | 6 Cyl 4.3 L GAS
View More
View related parts
GMC Wheel Seal, Front Inner
Part Number: 15651661
$4.48 MSRP: $8.41
You Save: $3.93 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Inner Bearing; Wheel Hub Repair Kit; Axle Seal; Grease Seal; Hub Seals; Inner Bearing Grease Seal; Outer Bearing Seal; Seal; Seal, Front Wheel Bearing
- Position: Front Inner
Fits the following GMC Models:
- C1500 | 1988-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- G2500 | 1993-1995 | Rally, Rally STX, Vandura | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- G3500 | 1993-1996 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 | 1992-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1992-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Axle Seal, Rear
Part Number: 23490372
$17.06 MSRP: $32.04
You Save: $14.98 (47%)
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Axle Seals
- Position: Rear
Fits the following GMC Models:
- Canyon | 2015-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Hub Seals, Rear
Part Number: 15589475
$28.88 MSRP: $54.24
You Save: $25.36 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Axle Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- C1500 | 1992-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1992-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1992-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1992-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1992-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1992-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Axle Seal, Rear Passenger Side
Part Number: 84649193
$8.66 MSRP: $15.46
You Save: $6.80 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Output Shaft Seal; Axle Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear Passenger Side
Fits the following GMC Models:
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Output Shaft Seal, Front
Part Number: 84428321
$3.92 MSRP: $7.10
You Save: $3.18 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Axle Shaft; Axle Seal; Axle Housing O-Ring; O-Ring; Seal, Front Axle
- Position: Front
- Replaced by: 84983738
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Axle Seals, Rear
Part Number: 26018700
$11.61 MSRP: $20.74
You Save: $9.13 (45%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Rear Wheel Bearing; Wheel Seal; Axle Seal; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- Safari | 1985-1989 | Base, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
GMC Axle Seal, Rear Driver Side
Part Number: 84649194
$8.66 MSRP: $15.46
You Save: $6.80 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Output Shaft Seal; Axle Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear Driver Side
Fits the following GMC Models:
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Axle Seal, Front Inner
Part Number: 23243766
$8.89 MSRP: $16.70
You Save: $7.81 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Front Drive Axle Inner Shaft; Output Shaft Seal; Seal, Front Axle
- Position: Front Inner
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Wheel Seal, Front
Part Number: 15617869
$21.13 MSRP: $39.70
You Save: $18.57 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Front Wheel Bearing; Axle Seal; Inner Bearing Seal; Inner Bearing Grease Seal
- Position: Front
Fits the following GMC Models:
- C1500 | 1991-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- C2500 | 1991-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- C3500 | 1991-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K1500 | 1991-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
- K2500 | 1991-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
- K3500 | 1991-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View More
View related parts
GMC Axle Seal, Rear Driver Side
Part Number: 84519493
$22.89 MSRP: $40.88
You Save: $17.99 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Axle Seals
- Position: Rear Driver Side
- Replaces: 84145159
Fits the following GMC Models:
- Terrain | 2018-2024 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Axle Seal, Rear
Part Number: 84524381
$20.08 MSRP: $37.70
You Save: $17.62 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Axle Seals; Seal
- Position: Rear
Fits the following GMC Models:
- Acadia | 2021-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
- Terrain | 2022-2023 | AT4, Denali, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Axle Seal, Rear
Part Number: 23243725
$14.75 MSRP: $27.70
You Save: $12.95 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Hub Assembly O-Ring, Front
Part Number: 84080139
$4.78 MSRP: $8.98
You Save: $4.20 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Bearing; Wheel Hub Repair Kit; Wheel Seal; Splash Shield Seal; Hub Assembly Seal; Seal, Rear Wheel Bearing Oil
- Position: Front
Fits the following GMC Models:
- Hummer EV Pickup | 2022-2023 | 3X, Edition 1 | BATTERY EV (EV/BEV)
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View More
View related parts
GMC Axle Seal, Rear
Part Number: 84446287
$12.85 MSRP: $24.15
You Save: $11.30 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft Bearing Or Hub; Wheel Seal; Axle Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Axle Seals, Front Inner
Part Number: 84937880
$25.72 MSRP: $45.92
You Save: $20.20 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Front Drive Axle Inner Shaft; Seal, Front Wheel Bearing
- Position: Front Inner
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Axle Seals
Part Number: 88982518
$26.66 MSRP: $50.06
You Save: $23.40 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- Savana 2500 | 2003-2010 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Savana 3500 | 2006-2009 | Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Rear Hub Seal
Part Number: 84273180
$4.84 MSRP: $8.64
You Save: $3.80 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Rear Wheel Hub (O Ring); Wheel Hub Repair Kit; Wheel Seal; Axle Seal; Hub Assembly Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
Fits the following GMC Models:
- Yukon | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS

| Page 1 of 4 |Next >

1-20 of 71 Results

GMC Wheel Seal Parts Questions & Experts Answers

Axle Seals, Front
15286593
Q: How to replace the front drive axle wheel seal or bearing on GMC Canyon?
A: The procedure to change front drive axle seals and bearings must start with removal of lower Control Arm swaybar links and wheel drive shafts. You should start by using tools from the j 29369-2 and j 2619-01 to separate the axle seal whereas tools from the same set remove the axle bearing. Afterward position the axle bearing into the intermediate housing before installing it with the j 23690 and j 8092 . The installation of the axle seal requires the j 21426 tool before reinstalling the wheel drive shaft and the swaybar link to the lower Control Arm. The maintenance ends with fluid level inspection and vehicle lower down.
Output Shaft Seal, Front Inner
22761722
Q: How to Ensure Proper Installation of the Wheel Seal on GMC Sierra 1500?
A: Starting the replacement of front drive axle inner shaft seal and inner shaft bearing requires j 8092 universal driver handle (J 8092), j 2619-01 slide hammer (J 2619-01), j 29369-1 bushing and bearing remover (J 29369-1), j 29369-2 bushing and bearing remover (2-3 inch) (J 29369-2), j 36609 axle tube bearing installer (J 36609), and j 45225 axle seal installer (J 45225). First elevate the vehicle and empty the differential carrier assembly of its fluid. You should extract the right side seal or bearing after removing the differential carrier case assembly and its internal axle shafts and housing units then unattaching the clutch fork assembly components and inner Axle Shaft from the inner Axle Shaft housing. Place the inner Axle Shaft housing into a vise before inserting the right bushing and bearing remover behind the seal or bearing (use either J 29369-1 or J 29369-2). Insert the slide hammer (J 2619-01) to the bushing and bearing remover when extracting the inner Axle Shaft seal or bearing. The process to replace left side seals begins by marking the alignment followed by wheel drive shaft disconnection and inner Axle Shaft and seal removal. Both replacement of the left side seal and bearing requires removal of the differential carrier assembly and attachment to a vise before performing the removal procedure again. The right side bearing and new Axle Shaft seal installation requires using the j 36609 axle tube bearing installer and j 8092 universal driver handle and j 45225 axle seal installer. Insert the inner Axle Shaft into position by careful tapping then rebuild all components along with the clutch fork before reattaching the differential carrier case assembly. Proceed with the left side installation when you removed its bearing and seal. The last installation step involves filling the differential carrier assembly with proper fluid before placing the vehicle back on the ground.
Axle Seal, Rear
15823962
Q: What tools are required to service and repair the wheel seal, wheel hub, bearing, and seal replacement for a 4WD on GMC Yukon?
A: A professional technician requires an axle remover item j 45859 to address the wheel-related mechanical issues of a 4wd car. For this task first lift the vehicle and then take off the tire wheel rotor in this sequence. Separate the Wheel Speed Sensor bolt from the knuckle and disconnect the brake hose bracket's bolt. Also remove the wheel drive shaft nut retaining cover. Installing the wheel drive shaft requires fresh nut replacement. Untighten the wheel drive shaft retaining nut along with its washer from the shaft using proper tools and disengage the Wheel Hub and bearing. Take out the Wheel Hub parts and then remove its mounting bolts for 15-series bearings before moving to 25/35 series Wheel Hub and bearing mounting bolts. Pull out all Wheel Hub parts and the splash shield as well as the o-ring seal from the steering knuckle bore on the 25/35 series vehicle. Check all damage in the o-ring seal when removing the Wheel Speed Sensor bolt. Replace the o-ring when needed. Clean and prepare both the steering knuckle bore and Wheel Hub and bearing assembly before applying wheel bearing grease or equivalent lubricant in the bore. Place the o-ring on the steering knuckle for 25/35 models before tightening the Wheel Speed Sensor bolt to 18 nm (13 ft lbs). Put both Wheel Hub and bearing units together with their splash shields onto the vehicle for 25/35 models and then put on Wheel Hub with bearing and splash shield for 15 series models. Fasten the Wheel Hub mounting bolts at 180 nm (133 ft.lbs) for the 15 series then put on the 25/35 series bolts and tighten Wheel Hub bolts to 180 nm (133 ft.lbs). Secure the wheel drive shaft with a washer and nut through the Wheel Hub then tighten the nut to 280 nm before fitting the Wheel Speed Sensor bracket to the steering knuckle. Proceed by placing the rotor tire and wheel on the vehicle and allow it to drop.