Make sure this part fits

GM 6559469
Clutch Bearing

1984-2005 GM

Customer Questions & Expert Answers (9)
GM 6559469 Clutch Bearing
GM 6559469 Clutch Bearing
  • Part Description
    Compressor Pulley R; A/C Compressor Clutch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1991-1996 Buick Commercial ChassisBase8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1992-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    1997-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1988-2004 Buick Regal25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    1995-1999 Buick RivieraBase6 Cyl 3.8 L GAS
    1991-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1992-1998 Buick SkylarkCustom, Gran Sport, Limited, Olympic Gold Edition4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
    1984-1988 Cadillac CimarronBase, d'Oro4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
    1994-1999 Cadillac DeVilleBase, Concours, d'Elegance8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 6559469 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 6559469 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after inserting the staking pin for the 2001 Chevrolet Camaro? Posted by Customer
    A:
    Insert the J 33019 and the staking pin into the hub bore, ensuring the rotor and bearing assembly is fully supported under the staking pin location.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    Q:
    What is the first step in the process for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Begin by clamping the Compressor Holding Fixture (J 41790) in a vise and attaching the A/C compressor to the holding fixture.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    Q:
    What is the final step in the process for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Remove both thumb screws from the compressor to the J 34992, take the J 34992 out of the compressor and the vise, and reinstall the air compressor to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    Q:
    What is the first step in the process for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Begin by clamping the Compressor Holding Fixture (J 41790) in a vise and attaching the A/C compressor to the holding fixture.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    Q:
    What should be done with the shaft key for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the shaft key and retain it for reassembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    Q:
    What are the final steps after confirming the installation for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Reinstall the shaft protector, remove the thumb screws from the J 34992 before taking it out of the vise, reinstall the air compressor in the vehicle, evacuate and recharge the refrigerant system, and perform a leak test on the fitting(s) of the repaired or reinstalled component using the Halogen Leak Detector (J 39400-A).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    Q:
    What is the required air gap between the frictional surfaces for the 2001 GMC Savana 1500? Posted by Customer
    A:
    The air gap should measure within 3.81-5.08 mm (0.15-0.20 in).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    Q:
    What is the process to remove the clutch plate and hub assembly for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Thread the J 33013-B into the hub, hold the body with a wrench, and turn the center screw to remove the clutch plate and hub assembly. Retain the shaft key for reassembly and remove the old assembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this A/C Clutch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Clutch Bearing 6559469 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 6559469 Clutch Bearing is available in the market under the name GM A/C Clutch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 6559469 Clutch Bearing fits certain Chevrolet S10, Tahoe, Malibu models, as well as GMC Sierra 1500, Yukon, Sonoma. Additionally, it is compatible with Cadillac Escalade, DeVille, Eldorado and Buick Regal, Riviera, Skylark models.
The original GM component designated by manufacturer part number 6559469 maintains top performance when functioning as the Compressor Pulley R; A/C Compressor Clutch unit. The component 6559469 is constructed from durable material and its dimensions span 3.1 x 3.2 x 1.0 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pulley Bearing; A/C Compressor Bearing; Rotor Bearing; Pulley W/Bearing.. The part 6559469 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.