Make sure this part fits

GM 18048081
Overhaul Kit, Rear

2003-2011 GM

Customer Questions & Expert Answers (17)
GM 18048081 Overhaul Kit, Rear
  • Part Description
    Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$53.84 MSRP: $104.47
You Save: $50.63 (49%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2007 GMC Sierra 1500Base, Denali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
    2007 GMC Sierra 1500 ClassicDenali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2007 GMC Sierra 1500 HD ClassicSLE, SLT8 Cyl 6.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18048081 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18048081 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after bleeding the brake system for the 2007 Cadillac DTS? Posted by Customer
    A:
    Reinstall the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be avoided when applying lubricant for the 2009 Cadillac DTS? Posted by Customer
    A:
    Avoid lubricant on the brake pad hardware.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the pin bolts for the 2010 Cadillac DTS? Posted by Customer
    A:
    Assemble the brake hose bolt with the new gaskets and attach it to the brake caliper, tightening to 45 Nm (33 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done with the brake hose to caliper bolt for the 2008 Cadillac DTS? Posted by Customer
    A:
    Detach the brake hose to caliper bolt and discard the 2 copper brake hose gaskets, plugging the openings to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after capping the brake hose for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the brake hose to caliper bolt and the brake hose, discarding the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done if new brake pads are being installed for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Clean the outside surface of the caliper boot with denatured alcohol and compress the piston to the bottom of the caliper bore.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do after installing the new caliper for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake hose fitting, then assemble 2 NEW copper brake hose gaskets to the brake hose bolt and hose before installing the brake hose to caliper bolt, tightening it to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do if the fluid level is higher than midway for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reduce it to the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step in the installation process for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the caliper piston and the new piston dust boot seal, using the Brake Caliper Piston Boot Seal Installer (J 45515) to fully seat the dust boot seal before reinstalling the brake caliper to the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after inspecting the fluid level for the 2006 Cadillac DTS? Posted by Customer
    A:
    Raise and support the vehicle, then mark the relationship of the wheel to the axle flange and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the brake pad guiding surfaces be prepared for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Clean all brake pad guiding surfaces on the caliper and bracket, and use denatured alcohol to clean parts not included in the repair kit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What do you do after installing the new caliper for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake hose fitting, attach 2 new copper brake hose gaskets to the brake hose bolt, and install the brake hose to caliper bolt, tightening it to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do if the fluid level is higher than midway for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Reduce it to the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after removing the brake caliper for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Caution is advised to avoid placing fingers in front of the piston when applying compressed air; use a thin piece of wood to prevent damage while directing compressed air into the brake hose inlet fitting port to remove the piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the process for removing the caliper and caliper bracket for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Remove the caliper and caliper bracket as an assembly, then take off the brake caliper bolts and the caliper from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after removing the brake caliper for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Caution is advised to avoid placing fingers in front of the piston when applying compressed air; instead, use a thin piece of wood to prevent damage while directing compressed air into the brake hose inlet fitting port to remove the piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Overhaul Kit, Rear 18048081 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18048081 Overhaul Kit, Rear is available in the market under the name GM Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18048081 Overhaul Kit, Rear fits certain Chevrolet Silverado 1500, Silverado 1500 Classic, Silverado 1500 HD models, as well as GMC Sierra 1500, Sierra 1500 Classic, Sierra 1500 HD. Additionally, it is compatible with Cadillac DTS models.
The original GM component designated by manufacturer part number 18048081 maintains top performance when functioning as the Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit unit at its Rear. The component 18048081 is constructed from durable material and its dimensions span 9.4 x 8.2 x 6.4 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Kit, Wheel Brake Cylinder/Caliper. The part 18048081 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 18048081. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.