Make sure this part fits

GM 12226954
Control Module

2000-2005 GM

Customer Questions & Expert Answers (14)
GM 12226954 Control Module
GM 12226954 Control Module
  • Part Description
    Module Assembly, Electronic Brake & Traction Control; ABS Control Module
  • Replaces
    09387966, 12200802, 9387966, 12217068
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2000-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12226954 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12226954 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed to access the EBCM for the 2001 Buick LeSabre? Posted by Customer
    A:
    Remove the left front wheel and the left front wheelhouse extension.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What issues may arise if an unprogrammed EBCM is installed for the 2005 Buick Park Avenue? Posted by Customer
    A:
    It may lead to inoperative or poorly functioning systems such as DRP, ABS, TCS, VSES, TIM, and VES, and may set DTC C1248 or C1255.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be reinstalled after completing the EBCM replacement for the 2005 Buick LeSabre? Posted by Customer
    A:
    Reinstall the left front wheelhouse extension and the left front wheel, then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    How do you unlock the EBCM connector for the 2000 Buick LeSabre? Posted by Customer
    A:
    Rotate the EBCM connector tab up to the unlocked position and remove the EBCM connector position assurance from the EBCM electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What is the torque specification for securing the BPMV bracket nuts for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Tighten the 2 BPMV bracket nuts to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be performed after the installation for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Perform the ABS Diagnostic System Check.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be recorded before removing brake pipes for the 2000 Buick LeSabre? Posted by Customer
    A:
    The location of all brake pipes to the BPMV for installation aid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What is the first step to replace the Electronic Brake Control Module (EBCM) for the 2002 Buick LeSabre? Posted by Customer
    A:
    Turn OFF the ignition and raise the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done with the EBCM connector tab before removing the connector for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Rotate the EBCM connector tab up to the unlocked position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    How should the area around the EBCM be prepared for the 2003 Buick LeSabre? Posted by Customer
    A:
    Ensure the area is free from contaminants and thoroughly wash all contaminants from around the EBCM.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What precaution should be taken regarding the ignition switch for the 2004 Buick Park Avenue? Posted by Customer
    A:
    Never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the ON position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What is the first step to ensure safety when replacing the Brake Pressure Modulator Valve (BPMV) for the 2004 Buick LeSabre? Posted by Customer
    A:
    Do not attempt to repair the brake pressure modulator valve assembly, as it must be replaced entirely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done if a new BPMV is installed for the 2003 Buick Park Avenue? Posted by Customer
    A:
    Remove the shipping plugs from the valve openings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Control Module 12226954 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12226954 Control Module is available in the market under the name GM ABS Control Module. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12226954 Control Module fits certain Buick LeSabre, Park Avenue models, as well as Pontiac Bonneville. Additionally, it is compatible with Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 12226954 maintains top performance when functioning as the Module Assembly, Electronic Brake & Traction Control; ABS Control Module unit. The component 12226954 is constructed from durable material and its dimensions span 8.1 x 7.1 x 5.1 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Module, Electronic Brake Control. The part 12226954 has available replacement options 09387966, 12200802, 9387966, 12217068. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.