Make sure this part fits

GM 19121909
Pinion Shaft, Front Passenger Side

1988-2019 GM

Customer Questions & Expert Answers (21)
GM 19121909 Pinion Shaft, Front Passenger Side
GM 19121909 Pinion Shaft, Front Passenger Side
  • Part Description
    Shaft, Front Axle; Axle Shaft
  • Position
    Front Passenger Side
  • Replaces
    15521907
  • Manufacturer
    General Motors
Make sure this part fits
$144.68 MSRP: $353.04
You Save: $208.36 (60%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1992-1994 Chevrolet BlazerBase, Cheyenne, Silverado, Silverado Sport8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1994 Chevrolet C1500454 SS, Base, Cheyenne, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    2000, 1992-1994 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19121909 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19121909 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you do before detaching the stabilizer shaft link for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Remove the drift from the rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft or gasket for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step in servicing and repairing the rear axle shaft of the 11 Inch Axle for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Begin by removing the axle cap bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step in the process for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the wheel and tire assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft and gasket for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    First, raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after gripping the axle shaft flange for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Twist to begin the removal and then take out the axle shaft from the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be removed after raising for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be reinstalled after securing the new axle shaft for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Reinstall the steering knuckle assembly, followed by the rear steering gear assembly, then the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the 11.5 inch axle bolts for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Tighten them to 185 Nm (136 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be removed after the tire and wheel assembly for the 2000 GMC C3500? Posted by Customer
    A:
    Remove the brake caliper, followed by the rear cover and gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for placing the C-lock for axles without a locking differential for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    For axles without a locking differential, place the C-lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the lock clip from the axle shaft end for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    The lock clip is spring loaded and fits securely in the axle shaft slot; it may require pushing off with a screwdriver or related tool, and pushing the axle shaft inwards towards the gears can assist in removing the lock clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you loosen the axle shaft for the 2000 GMC C3500? Posted by Customer
    A:
    Lightly rap the axle shaft flange with a soft-faced hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the 10.5 inch axle bolts for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Tighten the bolts to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles without a locking differential during installation for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Place the lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you create clearance for the C-lock for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential, and if necessary, tap it with a soft-faced mallet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the torque specifications for tightening the inboard flange bolts and the hub nut for the 2004 GMC Yukon? Posted by Customer
    A:
    Tighten the inboard flange bolts to 79 Nm (58 ft. lbs.) and the hub nut to 240 Nm (177 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axle shaft be installed for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Insert the axle shaft into the rear axle housing carefully to avoid damaging the seal, ensuring the splines engage the differential side gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you align the lock for the locking differential for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use a screwdriver or similar tool to rotate the lock until it aligns with the thrust block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pinion Shaft, Front Passenger Side 19121909 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19121909 Pinion Shaft, Front Passenger Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19121909 Pinion Shaft, Front Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19121909 maintains top performance when functioning as the Shaft, Front Axle; Axle Shaft unit at its Front Passenger Side. The component 19121909 is constructed from durable material and its dimensions span 8.9 x 4.0 x 3.7 inches while weighing 3.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner Shaft; Shaft. The part 19121909 has available replacement options 15521907. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.