Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19434137
Steering Gear

2007-2014 GM

Customer Questions & Expert Answers (4)
GM 19434137 Steering Gear
  • Part Description
    Gear Kit, Steering (Remanufacture)
  • Replaces
    19153072, 19207492, 15254062, 19179828, 19330565
  • Manufacturer
    General Motors
Make sure this part fits
$611.40 MSRP: $961.34
You Save: $349.94 (37%)
Core Charge: $150.00
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 19434137 Steering Gear is Ref No. 1 in the diagram below

    2008 Chevy Avalanche Steering Gear Diagram for 19434137
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19434137

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Cadillac EscaladeBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2007-2014 Chevrolet TahoeLS, LT, LTZ, PPV, SSV8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19434137 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19434137 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power steering gear (non rack and pinion) on Cadillac Escalade EXT? Posted by Customer
    A:
    Begin replacement of the Rack And Pinion by placing a drain pan below the vehicle then removing the optional engine protection shield. Drain all power steering fluid from its components and then use caps to seal the hoses and Rack And Pinion against dirt and debris. First disconnect the intermediate shaft from the Rack And Pinion before removing the Pitman Arm to relay rod nut. Start by using the universal steering linkage puller (J 24319-B) to separate the Pitman Arm from the relay rod before unbolting the bolts attaching the Rack And Pinion to the frame until you can remove the Rack And Pinion from the vehicle. To detach the Pitman Arm from the Rack And Pinion start by removing its retaining nut followed by using either Pitman Arm puller (J 6632-01) or Pitman Arm puller (J 29107-A). During installation mount the Pitman Arm to the Rack And Pinion before adding the retaining nut and washer and tightening the nut to 250 n.m (184 lb ft). Secure the Rack And Pinion to its frame using bolts torqued to 150 n.m (110 lb ft) prior to connecting the Pitman Arm to the relay rod and torquing the nut to 62 n.m (46 lb ft). Connect the intermediate shaft to the Rack And Pinion then remove Rack And Pinion and hose caps or plugs before installing the hoses while tightening each fitting to 32 n.m (24 lb ft). Bleed the power steering system before you uninstall safety stands and then lower the vehicle. You should also reinstall the engine protection shield if it comes with the setup.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power steering gear (non rack and pinion) on Cadillac Escalade ESV? Posted by Customer
    A:
    Begin replacement of the Rack And Pinion by placing a drain pan below the vehicle then removing the optional engine protection shield. Drain all power steering fluid from its components and then use caps to seal the hoses and Rack And Pinion against dirt and debris. First disconnect the intermediate shaft from the Rack And Pinion before removing the Pitman Arm to relay rod nut. Start by using the universal steering linkage puller (J 24319-B) to separate the Pitman Arm from the relay rod before unbolting the bolts attaching the Rack And Pinion to the frame until you can remove the Rack And Pinion from the vehicle. To detach the Pitman Arm from the Rack And Pinion start by removing its retaining nut followed by using either Pitman Arm puller (J 6632-01) or Pitman Arm puller (J 29107-A). During installation mount the Pitman Arm to the Rack And Pinion before adding the retaining nut and washer and tightening the nut to 250 n.m (184 lb ft). Secure the Rack And Pinion to its frame using bolts torqued to 150 n.m (110 lb ft) prior to connecting the Pitman Arm to the relay rod and torquing the nut to 62 n.m (46 lb ft). Connect the intermediate shaft to the Rack And Pinion then remove Rack And Pinion and hose caps or plugs before installing the hoses while tightening each fitting to 32 n.m (24 lb ft). Bleed the power steering system before you uninstall safety stands and then lower the vehicle. You should also reinstall the engine protection shield if it comes with the setup.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be avoided when disconnecting the steering components for the 2009 Cadillac Escalade? Posted by Customer
    A:
    Do not rotate the steering wheel or move the front tires to avoid un-centering the SIR coil assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Steering Gear 19434137 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19434137 Steering Gear is available in the market under the name GM Rack And Pinion. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19434137 Steering Gear fits certain Chevrolet Tahoe, Avalanche, Suburban 1500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19434137 maintains top performance when functioning as the Gear Kit, Steering (Remanufacture) unit. The component 19434137 is constructed from durable material. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Gear Assembly; Gear Kit, Steering. The part 19434137 has available replacement options 19153072, 19207492, 15254062, 19179828, 19330565. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.