Make sure this part fits

GM 12477497
Upper Hinge, Driver Side

2000-2004 GM

Customer Questions & Expert Answers (17)
GM 12477497 Upper Hinge, Driver Side
  • Part Description
    Hinge, Door Hinge
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2004 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12477497 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12477497 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after ensuring the rear mid gate is in the correct position for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Remove the hinge trim cover from the mid-gate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    How should the existing hinge be prepared for removal for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Lightly hand-sand the existing hinge with 100 grit or finer sandpaper to locate the four welds attaching the hinge to the door, and punch the center of each weld.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step in replacing the rear door hinge on the body side for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Begin by removing all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for tightening the hinge to the pillar nuts for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after securing the studs for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove each service nut and apply full-bodied caulk to the hinge mounting surface for a proper seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you prepare the hinge area for removal for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Eliminate excess sealer around the hinge and scribe its location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    How should the service hinge be positioned for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Position the service hinge within the scribe marks and center punch each stud location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the trunk/liftgate hinge on the removable rear panel mid gate for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    First, fold the rear seat back down and ensure the rear mid gate is in the upright position and latched.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    What drilling steps are required for the new hinge installation for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole at each center punch location, then drill an 11.5 mm (29/64 in) hole at the pilot locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after center punching the weld marks for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Drill through the hinge base at each punch location using a 13 mm (1/2 in) rotabroach hole saw or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after drilling through the hinge at each punch location for the 2004 GMC Yukon? Posted by Customer
    A:
    Clean the pillar surface to ensure a flush fit for the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    What should be done after installing each stud for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Draw the stud tight through the pillar using the supplied nuts and repeat for the remaining stud locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done if the hinge does not separate easily from the pillar for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Use a chisel to separate the hinge from the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What tools are needed to remove the upper cargo hinge for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    A 13 mm (1/2 in) drill bit and a chisel if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    Q:
    What is the next step after positioning the stud for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Tighten the stud through the pillar using the supplied nuts and repeat for the remaining stud locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step for the lower cargo hinge installation for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Position the rear body opening lower filler, mig-weld it in place, clean and prepare all weld surfaces, and reinstall all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Liftgate Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Hinge, Driver Side 12477497 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12477497 Upper Hinge, Driver Side is available in the market under the name GM Door Hinge, Liftgate Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12477497 Upper Hinge, Driver Side fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 12477497 maintains top performance when functioning as the Hinge, Door Hinge unit at its Driver Side. The component 12477497 is constructed from durable material and its dimensions span 6.1 x 6.1 x 3.3 inches while weighing 4.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge; Door Hinge. The part 12477497 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.