Make sure this part fits

GM 89060358
Brake Pads

2005-2009 GM

Customer Questions & Expert Answers (9)
GM 89060358 Brake Pads
  • Part Description
    Pad Kit, Front Disc Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$85.41 MSRP: $159.38
You Save: $73.97 (47%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89060358
    Part DescriptionPad Kit, Front Disc Brake; Disc Brake Hardware Kit
    Other NamesFront Pads; Pad Kit, Brake
    Item Dimensions10.1 x 4.8 x 3.2 inches
    Item Weight4.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU89060358
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Cadillac CTSBase, V6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS
    2005-2009 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 89060358 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89060358 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the brake pads for the 2006 Cadillac CTS? Posted by Customer
    A:
    Remove the brake pads and inspect the brake pad retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the process for installing new brake pads for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the new brake pads into the caliper, then install the upper caliper guide pin through the caliper and both brake pads, seating it with a hammer and punch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be inspected after removing the brake pads for the 2008 Cadillac STS? Posted by Customer
    A:
    Inspect the brake caliper guide pins and replace if damaged or corroded, and check the brake caliper piston boot for damage, replacing if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the final step after seating the brake caliper pistons and pads for the 2009 Cadillac STS? Posted by Customer
    A:
    Fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How many times should the brake pedal be applied for the 2009 Cadillac STS? Posted by Customer
    A:
    Wait 15 seconds and repeat until a firm brake pedal is achieved to properly seat the caliper pistons and brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after removing the brake pads for the 2005 Cadillac STS? Posted by Customer
    A:
    Inspect the brake caliper guide pins and replace if damaged or corroded, and check the brake caliper piston boot for damage, replacing if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What are the final steps after reinstalling the tire and wheel assembly for the 2006 Cadillac STS? Posted by Customer
    A:
    Lower the vehicle, and with the engine off, gradually apply the brake pedal to about 2/3 of its travel, then slowly release it. Wait 15 seconds and repeat until a firm brake pedal is achieved, then fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the next step after installing the new brake pads for the 2007 Cadillac STS? Posted by Customer
    A:
    Pivot the caliper down over the pads into the bracket, clean the threads of the lower caliper pin bolt and bracket holes with denatured alcohol, and apply threadlocker GM P/N 12345493 (Canadian P/N 10953488) to two-thirds of the bolt's threaded length.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89060358, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89060358 Brake Pads. It is sometimes referred to as GM Brake Pad. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89060358 Brake Pads. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery