Make sure this part fits

GM 26045426
Axle Shaft, Rear Driver Side

1996-2013 GM

Customer Questions & Expert Answers (27)
GM 26045426 Axle Shaft, Rear Driver Side
  • Part Description
    Shaft, Rear Axle Drive
  • Position
    Rear Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1996-2002 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-2002 Chevrolet Express 3500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1999-2010 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26045426 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26045426 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after pulling the wheel drive shaft through the lower control arm opening for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Clean the steering knuckle and the wheel drive shaft splines and threads, ensuring they are dry and free of grease, dirt, and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Place the gasket onto the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after pulling the axle shaft from the tube for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft or gasket for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    First, remove the flange bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What tools can be used if the rear axle shaft is difficult to remove for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Utilize the J 2619-01 (hammer) and J 45859 (remover/installer) to extract it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the brake caliper for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Next, take off the rear cover and gasket, then remove the pinion shaft locking bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the axle shaft for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Install the new axle shaft and secure it with the spring loaded lock clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axle flange bolts be installed for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the axle flange bolts and tighten them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you use to grip the axle shaft flange for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Use locking pliers to grip the rib on the axle shaft flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step after tightening the bolts for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Inspect and add axle lubricant to the axle housing if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the lock clip from the axle shaft end for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    The lock clip is spring loaded and fits securely in the axle shaft slot; it may require a screwdriver or related tool to push it off, and pushing the axle shaft inwards towards the gears can assist in this process.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after gripping the axle shaft flange for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Twist to begin the removal and then take out the axle shaft from the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do after loosening the axle shaft for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Grip the rib on the axle shaft flange with locking pliers and twist to initiate removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done to prevent the wheel drive shaft from turning while tightening for the 2004 GMC Yukon? Posted by Customer
    A:
    Insert a drift or large screwdriver through the brake caliper into one of the brake rotor vanes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the final steps after tightening the locking bolt for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Install the rear cover and gasket, the tire and wheel assembly, fill the rear axle with the proper fluid, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the new pinion shaft locking bolt for the 9.5 inch axle for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Tighten it to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Why is it important not to rotate the axle shaft during removal for the 2000 GMC Savana 3500? Posted by Customer
    A:
    To avoid misaligning the gears.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles with a locking differential when installing the new axle shaft for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Keep the pinion shaft partially withdrawn and place the C-lock on the axle shaft so that the ends are flush with the thrust block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the lock from the rear axle shaft for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Use a screwdriver to rotate the lock until it aligns with the thrust block, then push in on the rear axle shaft to remove the lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the 10.5 inch axle bolts for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Tighten the bolts to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the brake components for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the rear cover and gasket, then the pinion shaft locking bolt and the pinion shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after gripping the axle shaft flange for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Twist to initiate removal and pull the axle shaft from the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the lock clip from the axle shaft end for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    The lock clip is spring loaded and fits securely in the axle shaft slot; it may require pushing off with a screwdriver or related tool, and pushing the axle shaft inwards towards the gears can assist in removing the lock clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done if the axle is difficult to remove for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Utilize the J 45859 and J 2619-01 to assist in removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles with a locking differential during installation for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Keep the pinion shaft partially withdrawn and place the C-lock on the axle shaft so that the ends are flush with the thrust block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after aligning the pinion shaft for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the new pinion shaft locking bolt, tightening it to 36 Nm (27 ft. lbs.) for the 8.6 inch axle or 50 Nm (37 ft. lbs.) for the 9.5/9.6LD inch axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft, Rear Driver Side 26045426 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26045426 Axle Shaft, Rear Driver Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26045426 Axle Shaft, Rear Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 26045426 maintains top performance when functioning as the Shaft, Rear Axle Drive unit at its Rear Driver Side. The component 26045426 is constructed from durable material and its dimensions span 35.0 x 4.6 x 4.6 inches while weighing 17.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Shafts. The part 26045426 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.