Make sure this part fits

GM 90482454
Back-Up Switch

2000-2011 GM

Customer Questions & Expert Answers (18)
GM 90482454 Back-Up Switch
  • Part Description
    Switch, Back Up Lamp; Back Up Light Switch
  • Manufacturer
    General Motors
Make sure this part fits
$31.95 MSRP: $50.72
You Save: $18.77 (38%)
Ships in 1 Business Day
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2004 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
    2000-2005 Chevrolet CavalierBase, LS, LS Sport, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2000-2004 Oldsmobile AleroGL, GLS, GX4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2000-2004 Pontiac Grand AmGT, GT1, SE, SE1, SE24 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    2000-2005 Pontiac SunfireBase, GT, SE4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2003-2007 Saturn Ion1, 2, 34 Cyl 2.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 90482454 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 90482454 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Back Up Light Switch on Chevrolet Cavalier? Posted by Customer
    A:
    To replace the back up lamp switch; remove the back up lamp conster, change the back up light switch assembly by disconnecting it without knocking it and only using socket to prevent breakage of the switch assembly. In case of installing the new back up light switch, leave the pipe sealant GM P-N 1052080 or an equivalent at a quantity of 1 per switch and install by using 169 in 34 Nm or (24 ft. lbs.). Finally, reattach the connection for the back up lamp.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after raising the 2003 Cadillac CTS? Posted by Customer
    A:
    Disconnect the backup lamp switch electrical connector from the backup lamp switch and then remove the backup lamp switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be ensured when installing the new backup lamp switch for the 2004 Cadillac CTS? Posted by Customer
    A:
    Ensure to use only a socket to avoid damaging the switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step to replace the backup lamp switch for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    First, disconnect the backup lamp connector and remove the backup light switch assembly, ensuring that only a socket is used to avoid damaging the switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step to service the backup lamp switch for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    First, disconnect the backup lamp connector and remove the backup light switch assembly, ensuring that only a socket is used to prevent damage to the switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step to replace the backup lamp switch for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    First, remove the left front wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step to replace the backup lamp switch for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    First, remove the left front wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the torque specification for tightening the new backup light switch for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Tighten the switch to 33 Nm (24 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be done after installing the backup lamp switch for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    Reconnect the backup lamp connector and reinstall the left front wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    How should the new switch be installed for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Use only a socket to avoid damaging the switch assembly, and apply pipe sealant before tightening the switch to 33 N.m (24 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be used when installing the new switch for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Use only a socket to avoid damaging the switch assembly and apply pipe sealant, ensuring to use the correct sealant part number.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be done when installing the new switch for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Ensure to tighten it to 24 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    How should the new switch be installed for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Use only a socket to avoid damaging the switch assembly and apply pipe sealant, ensuring to use the appropriate sealant part number.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    How should the backup lamp switch assembly be removed for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Carefully remove the backup lamp switch assembly, ensuring that only a socket is used to avoid damaging the switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What should be used when installing the new switch for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Use only a socket to avoid damaging the switch assembly and apply pipe sealant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step to replace the backup lamp switch for the 2006 Chevrolet HHR? Posted by Customer
    A:
    First, remove the left front wheel and disconnect the backup lamp connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the final step after installing the new switch for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Reconnect the backup lamp connector and reinstall the left front wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Back-Up Switch 90482454 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 90482454 Back-Up Switch is available in the market under the name GM Back Up Light Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 90482454 Back-Up Switch fits certain Chevrolet Cobalt, HHR, Cavalier models, as well as Cadillac CTS. Additionally, it is compatible with Pontiac Grand Am, G5, Sunfire and Oldsmobile Alero models.
The original GM component designated by manufacturer part number 90482454 maintains top performance when functioning as the Switch, Back Up Lamp; Back Up Light Switch unit. The component 90482454 is constructed from durable material and its dimensions span 3.5 x 2.0 x 1.0 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch Kit, Back Up Lamp. The part 90482454 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.