Make sure this part fits

GM 15883320
Window Switch, Driver Side

2003-2007 GM

Customer Questions & Expert Answers (25)
GM 15883320 Window Switch, Driver Side
GM 15883320 Window Switch, Driver Side
  • Part Description
    Switch, Door Lock & Side Window
  • Position
    Driver Side
  • Replaces
    10398565, 15202851, 15125143, 15181223, 15112972
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2006, 2003 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2004-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2004-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2004-2006 Chevrolet Avalanche 1500Base, LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2004-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2005-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15883320 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15883320 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What systems need to be programmed after the installation for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Program the Tire Pressure Monitoring system and the Keyless Entry system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the process for installing the new power window switch for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Connect the electrical connector to the switch and press the switch into place on the door trim panel until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you secure the switch panel bezel to the front door trim panel for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Secure the switch panel bezel to the front door trim panel with a screw, tightening it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you detach the switch panel bezel from the door panel for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Carefully detach the switch panel bezel from the door panel using a flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should you do after releasing the retaining clips for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the door module from the switch panel bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the first step for installation of the new switch for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Connect the electrical connector to the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What tool is recommended to release the retaining clips on the door module for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the first step for installation for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Connect the electrical connector to the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    Where can you find programming and setup information for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Consult the relevant references.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the first step to replace the door lock and side window switch on the passenger side for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What tool is recommended to release the retaining clips on the door module for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    A wide plastic flat-bladed tool is recommended to release the retaining clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you secure the switch panel bezel to the front door panel for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Secure the switch panel bezel to the front door panel with the screw, tightening it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What tool is recommended to release the retaining clips on the door module for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    A wide plastic flat-bladed tool is recommended to release the retaining clips on both sides of the door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after removing the switch for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Disconnect the electrical connector from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What should be done after removing the front door trim panel for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Take out the screw that secures the switch panel bezel to the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the first step to replace the door lock and side window switch on the driver side for the 2005 GMC Yukon? Posted by Customer
    A:
    First, remove the front door trim panel and disconnect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you release the retaining clips on the door module for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Utilize a wide plastic flat-bladed tool to release the retaining clips on both sides of the door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you secure the switch panel bezel back into the door trim panel for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Position the switch panel bezel and module back into the door trim panel and install the screw that retains the switch panel bezel, tightening it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after connecting the electrical connector for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Press the switch into place on the door trim panel until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the first step for installation for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Connect the electrical connector to the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    How do you detach the switch panel bezel from the door panel for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Use a flat-bladed tool to detach the switch panel bezel from the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What is the first step for installation of the new switch for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Connect the electrical connector to the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the installation process for the door module for the 2006 GMC Yukon? Posted by Customer
    A:
    Insert the door module into the switch panel bezel until it snaps into place, then attach the bezel and module to the door panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after securing the switch panel bezel for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Reconnect the electrical connectors and reinstall the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Switch, Driver Side 15883320 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15883320 Window Switch, Driver Side is available in the market under the name GM Power Window Switch, Door Lock Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15883320 Window Switch, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15883320 maintains top performance when functioning as the Switch, Door Lock & Side Window unit at its Driver Side. The component 15883320 is constructed from durable material and its dimensions span 8.1 x 3.2 x 3.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch; Switch, Door And End Gate Electrical. The part 15883320 has available replacement options 10398565, 15202851, 15125143, 15181223, 15112972. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.