Make sure this part fits

GM 29541852
Neutral Safety Switch

2004-2005 GM

Customer Questions & Expert Answers (11)
GM 29541852 Neutral Safety Switch
GM 29541852 Neutral Safety Switch
  • Part Description
    Switch Kit, Transmission Safety Starting Switch Or Speed Sensing
  • Manufacturer
    General Motors
Make sure this part fits
$96.96 MSRP: $166.52
You Save: $69.56 (42%)
Ships in 1 Business Day
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2004-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2004-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2004-2005 Chevrolet Avalanche 1500Base, LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2004-2005 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2004-2005 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2004-2005 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2004-2005 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 29541852 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 29541852 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Back Up Light Switch on the ZF S6-650 on Chevrolet Silverado 2500? Posted by Customer
    A:
    To replace the lamp back up switch on the ZF S6-650, lift and support the vehicle in an appropriate manner. For the 6.6L models, you disconnect the back up lamp switch electrical connector, and for 8.1L models, you disconnect the back up lamp switch electrical connector. Then, got rid of the back up lamp switch. When you install the new switch, make sure to tighten its 20 Nm (15 ft. lbs.) according to the fastener notice. For 8.1L engine, the restoration of the back up lamp switch electrical connector while for 6.6L the restoration of the back up lamp switch electrical connector before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Back Up Light Switch on the NV 4500 on Chevrolet Silverado 3500? Posted by Customer
    A:
    First, to replace the back up lamp switch on the NV 4500, it is necessary to lift and properly secure the vehicle. We will first disconnect the back up lamp switch by detaching its electrical connector and pulling out the back up lamp switch along with its seal. Check to ensure that the seal is placed on the new switch before doing anything else. Mount the back up lamp switch and tighten it to 28 Nm (21 ft. lbs.). Lastly, reconnect the back up lamp switch electrical connector and lower down the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the PNP switch bolts be installed for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the PNP switch bolts finger tight.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the torque specification for tightening the new backup lamp switch for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Tighten the switch to 37 Nm (27 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    How do you reinstall the transmission control lever for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the transmission control lever onto the manual shaft with the nut, tightening it to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What tool is used to align the PNP switch for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    The J 41364-A Park Neutral Switch Aligner (J 41364-A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the next step after disconnecting the electrical connector for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Remove the backup lamp switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the first step to replace the backup lamp switch on the NV 4500 for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    First, raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    Q:
    What is the next step after raising and supporting for the 2005 GMC Yukon? Posted by Customer
    A:
    Disconnect the Park/Neutral Position (PNP) switch electrical connector and remove the range selector cable end from the range selector lever ball stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Neutral Safety Switch
    Q:
    What is the final step after installing the new backup lamp switch for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Reconnect the backup lamp switch electrical connector and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Back Up Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Neutral Safety Switch 29541852 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 29541852 Neutral Safety Switch is available in the market under the name GM Back Up Light Switch, Neutral Safety Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 29541852 Neutral Safety Switch fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 29541852 maintains top performance when functioning as the Switch Kit, Transmission Safety Starting Switch Or Speed Sensing unit. The component 29541852 is constructed from durable material and its dimensions span 13.3 x 5.0 x 3.2 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch Kit, Safety Starting Switch; Transmission Safety Start/Warning; Back Up Lamp. The part 29541852 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.