Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 89060435
EGR Valve

2001-2011 GM

Customer Questions & Expert Answers (10)
GM 89060435 EGR Valve
GM 89060435 EGR Valve
GM 89060435 EGR Valve
GM 89060435 EGR Valve
  • Part Description
    Valve Assembly, EGR; EGR Vacuum Solenoid
  • Replaces
    88894013, 89017647, 12575313
  • Manufacturer
    General Motors
Make sure this part fits
$101.58 MSRP: $316.92
You Save: $215.34 (68%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 89060435 EGR Valve is Ref No. 10 in the diagram below

    2006 Buick LaCrosse EGR Valve Diagram for 89060435
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89060435

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2006-2011 Buick LucerneCX, CXL, CXS, Super6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2002-2004 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    2001-2004 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 8.1 L GAS
    2001-2004 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 8.1 L GAS
    2001-2004 Chevrolet Suburban 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2004 GMC Sierra 2500 HDBase, SL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2001-2004 GMC Sierra 3500Base, SL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2001-2004 GMC Yukon XL 2500SLE, SLT8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 89060435 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89060435 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the EGR valve on Buick Lucerne? Posted by Customer
    A:
    You should start the replacement of the exhaust gas recirculation valve by taking off the intake manifold cover. To replace the exhaust gas recirculation valve start by disconnecting the engine harness electrical connector from the EGR Valve before removing the EGR Valve nuts, the valve itself and finishing with removal of the EGR Valve Gasket. You should clean both mating surfaces that will integrate the EGR Valve. One should install brand new EGR Valve Gasket and EGR Valve before securing EGR Valve nuts and torquing them to 25 n.m (18 lb ft). In the last step of the procedure, attach the engine harness electrical connector to the EGR Valve before putting back the intake manifold cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the EGR Valve on Buick Lucerne? Posted by Customer
    A:
    The first step to replace the exhaust gas recirculation (EGR) valve starts with removal of the intake manifold cover. The first step is to disconnect the engine harness electrical connector from the EGR Valve so users can proceed to remove the EGR Valve nuts then the valve before removing its gasket. Before adding the new EGR Valve Gasket and valve, properly clean the mating areas of the EGR Valve. The EGR Valve installation requires securing it with nuts following a 25 n.m (18 lb ft) torque specification according to the fastener notice. After reattaching the engine harness electrical connector to the EGR Valve replace the intake manifold cover to complete installation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the EGR valve on Cadillac DTS? Posted by Customer
    A:
    The first step to replace the exhaust gas recirculation valve requires the removal of any necessary fuel injector sight shield. First remove the engine harness electrical connector from the EGR Valve and then take out both egr bracket shield nuts along with the shield itself. Extract both EGR Valve bolts and the EGR Valve from its place before discarding the gasket used for the EGR Valve. The inspection of egr passages inside the water pump housing should be completed to remove accumulated deposits when needed. Apply cleaning to the EGR Valve mounting surface. Insert a new egr gasket into the egr installation while following the fastener notice and fasten the EGR Valve in place. Reinstall the egr bracket shield while tightening its nuts to 10 n.m (89 lb in). Fasten the EGR Valve bolts to 24 n.m (18 lb ft). Luke tops off the installation process by connecting the engine harness electrical connector to the EGR Valve and optionally reattaching the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to properly service and replace the EGR Valve on Cadillac DTS? Posted by Customer
    A:
    A replacement of the exhaust gas recirculation (EGR) valve requires initial removal of fuel injector sight shield when required followed by disconnecting the engine harness electrical connector from the EGR Valve. The egr procedure starts by unscrewing both shield nuts from the egr bracket and then removing the bracket shield before pulling out the EGR Valve by removing its bolts. Discard the worn EGR Valve Gasket before you clean the egr mounting surface of the valve and inspect and clean egr passages inside the water pump housing. Apply new egr gasket before installing the EGR Valve which should be bolted in place with torque at 24 n.m (18 lb ft). Reestablish the egr bracket shield together with its nuts which need tightening to 10 n.m (89 lb in) before connecting the engine harness electrical connector to the EGR Valve and reinstalling the fuel injector sight shield if previously removed.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the EGR valve on Chevrolet Avalanche 2500? Posted by Customer
    A:
    Disconnection of the Electrical connector from the EGR valve stands as the first step before replacing it. Proceed by unfastening the two retaining nuts from the EGR valve then extract the EGR valve from its position. Wash out the EGR valve adapter bracket by removing its gasket while cleaning it from any residue. Put a new gasket on the EGR adapter bracket prior to inserting the EGR valve while fastening the two nuts until they reach 22 N.m (16 lb ft). The installation process ends by reattaching the electrical connector to the EGR valve.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the EGR valve on Chevrolet Suburban 2500? Posted by Customer
    A:
    Disconnection of the Electrical connector from the EGR valve stands as the first step before replacing it. Proceed by unfastening the two retaining nuts from the EGR valve then extract the EGR valve from its position. Wash out the EGR valve adapter bracket by removing its gasket while cleaning it from any residue. Put a new gasket on the EGR adapter bracket prior to inserting the EGR valve while fastening the two nuts until they reach 22 N.m (16 lb ft). The installation process ends by reattaching the electrical connector to the EGR valve.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the electrical connector for the 2007 Buick Lucerne? Posted by Customer
    A:
    Remove the EGR valve nuts and the EGR valve itself, followed by the EGR valve gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    What should be inspected after removing the EGR valve for the 2008 Cadillac DTS? Posted by Customer
    A:
    Inspect the EGR passages in the water pump housing for deposits and clean them as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar EGR Valve
    Q:
    What should be done after installing the EGR bracket shield for the 2010 Cadillac DTS? Posted by Customer
    A:
    Reconnect the engine harness electrical connector to the EGR valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar EGR Valve
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM EGR Valve 89060435 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89060435 EGR Valve is available in the market under the name GM EGR Filter, EGR Vacuum Solenoid, EGR Valve. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89060435 EGR Valve fits certain Chevrolet Silverado 2500 HD, Silverado 3500, Avalanche 2500 models, as well as GMC Sierra 2500 HD, Sierra 3500, Yukon XL 2500. Additionally, it is compatible with Cadillac DTS and Buick LaCrosse, Lucerne models.
The original GM component designated by manufacturer part number 89060435 maintains top performance when functioning as the Valve Assembly, EGR; EGR Vacuum Solenoid unit. The component 89060435 is constructed from durable material and its dimensions span 6.2 x 5.2 x 4.2 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Valve, Emission Control System. The part 89060435 has available replacement options 88894013, 89017647, 12575313. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.