Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar; Latch, Rear Compartment Lid
Position: Rear
Replaces: 25705649, 15898978, 25771898
Fits the following Cadillac Models:
CTS | 2003-2007 | Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
STS | 2005-2011 | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Q: How to replace the rear trunk latch on Cadillac CTS?
A: To change the rear compartment lid latch you need to first open the rear storage area. First remove the rear compartment interior release handle then take out the electrical connector from the rear compartment lid latch. Unfasten and detach bolts that connect the rear compartment lid latch to the lid. Also remove the complete lid latch unit with its release cable. Place the rear compartment lid latch onto its designated position on the rear compartment lid while following the fastener notice for correct assembly. Add fasteners to the rear compartment lid latch and tighten them to 25 Nm (18 lb ft) before attaching the electrical connector and rear compartment lid latch interior release handle. Set back the trim panel from the rear compartment before closing the compartment.
Q: How to replace the rear trunk latch on Cadillac SRX?
A: Start replacing the liftgate latch by opening the liftgate then taking off the liftgate trim panel. Start by taking off the bolts of the liftgate latch then removing the connection between the release cable and latch. After disconnect the electrical connectors from the latch. You can take out the liftgate latch after executing previous steps. You need to plug the electrical connectors into the liftgate latch while feeding the liftgate latch release cable through the latch. Put the liftgate latch firmly into place by following fastener notice () instructions on service precautions and fit the bolts at 10 n.m (89 lb in). Reposition the liftgate lid trim panel and secure the liftgate with its proper mechanism.
Q: How to replace the rear trunk latch on Cadillac XLR?
A: Begin the installation step by opening the rear compartment and pulling back the carpet in the center of the compartment. Remove the electrical connector and the manual release cable from the latch's terminal ends. Use Part Paint to mark the exact location of the latch on its new position. Unscrew the nuts connecting the latch to the rear panel surface before taking out the latch. Append the latch to the rear compartment panel and attach its nuts while tightening them to 10 N.m (89 lb in). Fasten the manual release cable and electrical connector to the latch unit after fitting the rear fascia back into place along with moving the rear center compartment carpet back into position and closing the rear storage compartment.