Other Name: Fitting, A/C Compressor Cut-Out Switch; Air Temperature Sensor; HVAC Pressure Switch; System Switch; Pressure Switch; A/C Electric Temperature Sensor; A/C Compressor Switch; A/C Evaporator Sensor
Replaces: 22624069
Fits the following Chevrolet Models:
Bolt EUV | 2022-2023 | LT, Premier | BATTERY EV (EV/BEV)
Bolt EV | 2017-2023 | LT, Premier | BATTERY EV (EV/BEV)
Malibu | 2016-2019 | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
Silverado 1500 | 2009-2013 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Spark EV | 2014-2016 | LT | BATTERY EV (EV/BEV)
Tahoe | 2007-2014 | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Volt | 2011-2019 | Base, LT, Premier | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Switch, Air Conditioner Electric Temperature Control; A/C Compressor Cut-Out; HVAC Pressure Switch.; Switch, A/C Electric Temperature And Motor Control
Fits the following Chevrolet Models:
Avalanche 1500 | 2002-2003 | Base, North Face, On Road Edition, WBH, Z71 | 8 Cyl 5.3 L GAS
Avalanche 2500 | 2002-2003 | Base | 8 Cyl 8.1 L GAS
Other Name: Switch Assembly-A/C Compressor Engine Coolant; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; Switch, A/C Electric Temperature And Motor Control
Fits the following Chevrolet Models:
Lumina | 1990 | Base, Euro | 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS
Other Name: Switch, Air Conditioner Electric Temperature Control; A/C Compressor Cut-Out; HVAC Pressure Switch.; Switch; Switch, A/C Electric Temperature And Motor Control
Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; AC Temperature Sensor; Refrigerant Temperature Sensor; Sensor, A/C Electric Temperature And Motor Control
Replaces: 15781471, 19129839
Fits the following Chevrolet Models:
Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 6 Cyl 3.0 L FLEX
Equinox | 2006-2009 | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
G10 | 1993-1995 | Beauville, Chevy Van, Sportvan | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
G20 | 1993-1995 | Beauville, Chevy Van, Sportvan | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
G30 | 1993-1996 | Beauville, Chevy Van, Hi-Cube, Sportvan | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Name: Switch Assembly-A/C Compressor Engine Coolant; A/C Compressor Cut-Out Switch; HVAC Pressure Switch; HVAC System Switch; Pressure Cut-Off Switch; Switch, A/C Electric Temperature And Motor Control
Fits the following Chevrolet Models:
Camaro | 1986-1992 | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
| Page 1 of 2 |Next >
1-20 of 37 Results
Chevrolet A/C Compressor Cut-Out Switches Parts Questions & Experts Answers
Q: How to Replace A/C Compressor Cut-Out Switches and Ensure Proper Installation for Low Pressure Sensor on Chevrolet Astro?
A: Before changing the a/c low pressure switch, pull the electrical plug off the a/c low pressure switch and then slide the switch off of the accumulator . Coat the new o-rings seal truthfully with the mineral base 525 viscosity refrigerant oil and install it on the switch. Next, install a/c low pressure switch to the accumulator, and tighten it to 6 n.m (53 lb in), making sure to use the fastener notice in service precautions. Finally reconnect the electrical connector a/c to the low pressure switch and carry out a leak test on the fittings of the component using j 39400-a.
Q: How to Identify and Replace A/C Compressor Cut-Out Switches on Chevrolet Equinox?
A: Start the replacement process of the Air Conditioning (A/C) Refrigerant Low Temperature Sensor by removing the left side insulator/closeout panel. Remove the communications interface module from your vehicle when it has OnStar(R) installed. Disconnect the temperature sensor connector from its connection point before you twist the temperature sensor one quarter turn to unhook it from the evaporator case assembly. Finally remove the temperature sensor. Install the new temperature sensor into the evaporator case assembly then turn it one quarter turn for complete installation. The temperature sensor needs reconnection to its sensor after which reinstall the removed communications interface module followed by installation of the left side insulator/closeout panel.
Q: How to Replace A/C Compressor Cut-Out Switches and Ensure Proper Functionality on Chevrolet S10?
A: First, you should withdraw the refrigerant from the a/c system before replacing the a/c low pressure switch. Remove the electrical connector from the a/c low pressure switch and then take out the switch from the accumulator. After that, put the new a/c low pressure switch onto the accumulator and tighten it to 5 n.m (44 lb in). Rejoin the a/c low pressure switch electrical connector, and after that evacuate and recharge the a/c system. Make sure to check all the fittings and components with the halogen leak detector (J 39400-A) to find any leaks.