How to replace the ignition coil on Chevrolet Silverado 1500?

To change Ignition Coil, first remove the air cleaner outlet resonator, then disconnect the chassis fuel feed pipe quick connect fitting from engine fuel feed pipe. Next, unplug the engine wiring harness electrical connector from the manifold absolute pressure (MAP) sensor as well as the connector from the evaporative emission (EVAP) canister purge solenoid valve. Pull off the engine wiring harness connector position assurance (CPA) retainer at the fuel meter body and disconnect the electrical connector from the fuel meter body. Take off clips (1, 2) from the engine harness brackets and the rear bracket bolts, and bracket. Mark the routing order of the spark plugs wires prior to removing them (1, 2) from the Ignition Coil, and reposition the wires out of the work space. Remove the engine wiring harness electrical connector from the Ignition Coil and re-arrange the harness branches accordingly. Daylight image ion coil bolts and coil from bracket and if necessary, disconnect Ignition Coil bracket bolts and bracket. For installation, routing, if necessary, install Ignition Coil bracket to the lower intake, install bolt, tighten to 12 nm (106 lb in). Mount the Ignition Coil on top of the bracket and bolt it with another bolt while tightening these to 12 nm (106 lb in). Position the engine wiring harness branches as required, connect the electrical connector to the Ignition Coil, position the Spark Plug Wires to the Ignition Coil. Attach the Spark Plug Wires (1, 2) to the Ignition Coil as indicated when removing. Mount the engine wiring harness rear bracket onto the upper Intake Manifold, and install the bolts with a torque of 10 nm (89 lb in). Clip the engine wiring harness clips (1,2) onto engine harness brackets, connect electric connector to fuel meter body, and install cpa retainer onto fuel meter body. Connect the evap canister purge solenoid valve and the MAP Sensor to the electrical connector. Finally, join the chassis fuel feed pipe quick connect fitting with the engulving fuel feed pipe and fix the air cleaner outlet resonator.

OEM Chevrolet Silverado 1500 Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Ignition Coils found

View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 12699382
$79.39 MSRP: $163.16
You Save: $83.77 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Ignition Module; Coil; Coil, Ignition Coil
- Replaced by: 12739916
- Replaces: 12573190
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Silverado 1500 | Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 19418993
$55.76 MSRP: $114.58
You Save: $58.82 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Replaces: 12558693, 19355500
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 12611424
$79.39 MSRP: $163.16
You Save: $83.77 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Coil; Coil, Ignition Coil
- Replaced by: 12739916
- Replaces: 12570616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Silverado 1500 | Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 12713668
$28.52 MSRP: $53.56
You Save: $25.04 (47%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaced by: 12723610
- Replaces: 12619161, 12669351
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023, 2014-2017 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 19418992
$74.88 MSRP: $134.99
You Save: $60.11 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition Coil; Coil Kit, Ignition Coil
- Replaces: 10457730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 12712681
$47.22 MSRP: $73.97
You Save: $26.75 (37%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Coil, Ignition Coil
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, LT, LT Trail Boss, RST, WT | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 12710620
$45.18 MSRP: $70.78
You Save: $25.60 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaces: 12698943
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2022 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, LT, LT Trail Boss, RST, WT | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 19432144
$91.70 MSRP: $185.76
You Save: $94.06 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Ignition Module; Coil, Ignition Coil
- Replaces: 12587153, 12595088, 12568185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Silverado 1500 | LS, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 19418996
$70.98 MSRP: $145.86
You Save: $74.88 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Replaces: 10489421, 19207138
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2007 Chevrolet Silverado 1500 | Base, LS, LT, WT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Silverado 1500 Ignition Coil Part Number: 12708496
$78.58 MSRP: $161.49
You Save: $82.91 (52%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaced by: 12726023
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2023 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS

Chevrolet Silverado 1500 Ignition Coil

Want to cut long-term maintenance and repair costs? Choose OEM Ignition Coil. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Silverado 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Silverado 1500 Ignition Coil includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Silverado 1500 Ignition Coil Parts Questions & Experts Answers

Ignition Coil
12611424
Q: How to replace the ignition coil on Chevrolet Silverado 1500?
A:
To change Ignition Coil, first remove the air cleaner outlet resonator, then disconnect the chassis fuel feed pipe quick connect fitting from engine fuel feed pipe. Next, unplug the engine wiring harness electrical connector from the manifold absolute pressure (MAP) sensor as well as the connector from the evaporative emission (EVAP) canister purge solenoid valve. Pull off the engine wiring harness connector position assurance (CPA) retainer at the fuel meter body and disconnect the electrical connector from the fuel meter body. Take off clips (1, 2) from the engine harness brackets and the rear bracket bolts, and bracket. Mark the routing order of the spark plugs wires prior to removing them (1, 2) from the Ignition Coil, and reposition the wires out of the work space. Remove the engine wiring harness electrical connector from the Ignition Coil and re-arrange the harness branches accordingly. Daylight image ion coil bolts and coil from bracket and if necessary, disconnect Ignition Coil bracket bolts and bracket. For installation, routing, if necessary, install Ignition Coil bracket to the lower intake, install bolt, tighten to 12 nm (106 lb in). Mount the Ignition Coil on top of the bracket and bolt it with another bolt while tightening these to 12 nm (106 lb in). Position the engine wiring harness branches as required, connect the electrical connector to the Ignition Coil, position the Spark Plug Wires to the Ignition Coil. Attach the Spark Plug Wires (1, 2) to the Ignition Coil as indicated when removing. Mount the engine wiring harness rear bracket onto the upper Intake Manifold, and install the bolts with a torque of 10 nm (89 lb in). Clip the engine wiring harness clips (1,2) onto engine harness brackets, connect electric connector to fuel meter body, and install cpa retainer onto fuel meter body. Connect the evap canister purge solenoid valve and the MAP Sensor to the electrical connector. Finally, join the chassis fuel feed pipe quick connect fitting with the engulving fuel feed pipe and fix the air cleaner outlet resonator.